2″ Copper 45° Press Elbow – Lead-Free Fitting for Press-Connect Copper Systems
The 2″ Copper 45-Degree Press Elbow is a wrought copper fitting designed for directional changes in press-connect copper tubing systems. Engineered for use in potable water, hydronic heating, and low-pressure HVAC applications, this elbow allows for a 45° transition while maintaining system flow efficiency and mechanical reliability.
Manufactured from lead-free copper alloy in accordance with ASTM B75 (Alloy C12200), the fitting features press ends compatible with standard press-connect jaws. The integral sealing element—typically EPDM—forms a mechanical and watertight seal without the need for soldering, flame, or additional sealants.
Technical Specifications
- ✅Nominal Size2 inch
- ✅Connection TypePress x Press
- ✅Angle45 degrees
- ✅MaterialWrought copper, lead-free (ASTM B75, Alloy C12200)
- ✅Sealing ElementEPDM (factory-installed)
- ✅CertificationsNSF/ANSI 61 & 372 compliant, ASME B16.51
Performance and Application Benefits
- ✅Press-Connect System IntegrationDesigned for use with standard press tools and jaws (compatible with Viega®, NIBCO®, or equivalent systems).
- ✅Low-Profile TransitionFacilitates directional changes where space constraints or flow optimization is required.
- ✅Thermal CompatibilitySuitable for hot and cold water systems, including closed-loop hydronic circuits.
- ✅Lead-Free ComplianceMeets federal and state regulations for potable water installations.
- ✅Reduced Installation TimeEliminates flame and soldering, supporting faster labor and safer conditions.
Installation Guidelines
Ensure pipe ends are deburred, cleaned, and marked to insertion depth. Use a calibrated press tool and compatible jaws to complete the joint. Verify alignment prior to pressing. Always perform hydrostatic testing per project specifications and manufacturer recommendations after assembly.
Common Use Cases
The 2″ Copper 45° Press Elbow is used in commercial plumbing risers, potable water distribution loops, HVAC lines, and multi-family residential systems. Its 45° geometry supports system design flexibility while minimizing flow restriction in directional transitions.
Code Compliance
Lead-free copper press fittings are required in potable systems by federal Safe Drinking Water Act regulations and are widely accepted under IPC, UPC, and state-level plumbing codes.
The 2″ Copper 45-Degree Press Elbow is a code-compliant, mechanically reliable solution for copper piping systems requiring streamlined direction changes and fast, flameless assembly in new construction or retrofit environments.
Specifications
Buying Information
Confirm the 2 inch configuration, copper material, angle and copper x copper ends before ordering.




