2” Copper Press Tee – Lead-Free Fitting for Secure Branch Connections
The 2” copper press tee provides a robust solution for forming branch connections within copper tube systems. Manufactured from lead-free copper alloy, this fitting is engineered to deliver long-term reliability in potable water, hydronic heating, and other pressurized system applications. The press connection ends allow for flame-free assembly using approved mechanical pressing tools, reducing installation time while maintaining consistent sealing performance.
Product Features
- ✅Press x Press x Press ConfigurationDesigned for secure, permanent connections in Type K, L, and M hard copper tubing.
- ✅Lead-Free ConstructionMeets all federal and state requirements for use in drinking water systems under NSF/ANSI 61 and NSF/ANSI 372.
- ✅Uniform Press SealUtilizes factory-installed EPDM sealing elements to ensure watertight joints across all branches.
- ✅High-Performance Copper AlloyOffers corrosion resistance and thermal durability in both hot and cold systems.
- ✅Pressure RatingSuitable for systems rated up to 200 PSI and temperatures up to 250°F (seal dependent).
Applications
This press tee is commonly used in commercial and residential systems for branch connections in potable water lines, closed-loop hydronic systems, and non-potable water systems. Its compact profile allows for installation in tight areas without the need for soldering or threading equipment.
Installation Requirements
Pipe ends must be properly cut, deburred, cleaned, and marked before pressing. Only press tools, jaws, and calibration settings specified by the fitting manufacturer should be used to ensure proper engagement and seal integrity. Do not use for gas applications unless explicitly rated and approved.
Technical Specifications
- Size2” nominal (all outlets)
- Connection TypePress x Press x Press
- MaterialC12200 or equivalent lead-free copper
- Seal TypeEPDM (pre-installed)
- ComplianceASME B16.51, NSF/ANSI 61, NSF/ANSI 372, IAPMO listed
Code Compliance Note
Lead-free copper fittings are mandated by the Safe Drinking Water Act and various plumbing codes throughout the U.S., including IPC and UPC. This press tee is suitable for use in jurisdictions requiring ≤0.25% weighted average lead content across wetted surfaces.
For branch connections that demand mechanical strength, pressure performance, and speed of installation, the 2” copper press tee offers a professional-grade solution. Ideal for both retrofit and new construction environments where labor efficiency and code compliance are critical.
Specifications
Buying Information
Match PF 40102 to the existing component before ordering




