Skip to content
Need help identifying a part? Contact parts support
SKU: 6619Brand: Fernco
,

2 inch Flexible Cap (Copper Cast Iron PVC or Steel Pipe)

$0.88

Fernco QC-102 Qwik Cap – 2 inch Flexible PVC Cap with Stainless Steel Clamp The Fernco QC-102 Qwik Cap is a flexible termination cap designed for sealing open 2-inch pipe ends in non-pressurized drain, waste, and vent (DWV) systems.

Quantity
SKU: 6619 Categories: ,

Fernco QC-102 Qwik Cap – 2 inch Flexible PVC Cap with Stainless Steel Clamp

The Fernco QC-102 Qwik Cap is a flexible termination cap designed for sealing open 2-inch pipe ends in non-pressurized drain, waste, and vent (DWV) systems. Manufactured from elastomeric polyvinyl chloride (PVC) and equipped with a stainless steel worm-drive clamp, this fitting provides a mechanical seal that accommodates copper, cast iron, PVC, and steel pipe materials.

Compliant with ASTM C1173 and CSA B602 standards, the QC-102 is suitable for permanent or temporary capping of unused pipe stubs or cleanouts. It is ideal for both new construction and repair work, and can be removed and reused for future access or testing. The flexible PVC body conforms to slight irregularities in pipe OD, allowing for quick and effective sealing across a variety of pipe surfaces.

Technical Specifications

  • ManufacturerFernco
  • ModelQC-102
  • Nominal Size2 inch
  • MaterialFlexible PVC (ASTM C1173 compliant)
  • Clamp300-series stainless steel, torque to 60 in-lbs
  • Pipe CompatibilityCopper, Cast Iron, Steel, PVC, ABS
  • CertificationsCSA B602, UPC/IAPMO Listed, ASTM C1173

Installation Guidelines

Apply the cap over a clean, round, and properly deburred pipe end. Tighten the stainless steel clamp uniformly using a screwdriver or calibrated torque wrench to the manufacturer’s recommended torque (60 in-lbs). This fitting is not suitable for pressurized systems. Use only in gravity-flow DWV applications unless otherwise rated.

Common Applications

Used to seal off open pipe ends in DWV systems, including test risers, fixture branch terminations, abandoned lines, or future expansion points. Suitable for underground and above-ground installations, provided local code permits the use of mechanical flexible caps.

Code and Material Notes

Fernco Qwik Caps are designed in compliance with plumbing code requirements for mechanical sealing devices. The elastomeric PVC is resistant to UV degradation, ozone, and common household chemicals found in DWV systems. The product is reusable and may be used for temporary closures during testing or renovation work.

Flexible Termination Cap for DWV System Integrity

The Fernco QC-102 Qwik Cap offers a reliable, field-ready solution for sealing 2 inch pipe ends in gravity-flow drainage systems. It ensures a quick installation, secure mechanical seal, and compatibility with a wide range of piping materials—meeting the needs of code-compliant, professional-grade plumbing systems.

Specifications

Specifications Weight 0.200000 Brand Fernco ADA Compliance No Length (inches) 2.76 Width (inches) 2.79 Height (inches) 1.25 Side A 2″ Fitting Type Caps Item Type Fittings Manufacturer Fernco, Inc. MPN QC-102 Material Rubber Product Family Fittings Item Returns This item can be returned
Brand

Fernco

MPN

QC-102

0
Scroll to Top