Skip to content
Need help identifying a part? Contact parts support
SKU: 4864Brand: Non-Specified Brand
,

2″ ID x 10′ Copper Tubing, Straight Hard, Type M

$64.18

Streamline MH20010 – 2″ Type M Copper Tube, Hard Drawn, 10-Foot Length Streamline® Type M hard copper tubing is manufactured from C12200 alloy and meets ASTM B88 standards for water distribution and general plumbing applications.

Quantity
SKU: 4864 Categories: ,

Streamline MH20010 – 2″ Type M Copper Tube, Hard Drawn, 10-Foot Length Streamline® Type M hard copper tubing is manufactured from C12200 alloy and meets ASTM B88 standards for water distribution and general plumbing applications. This 2-inch nominal tubing has an outside diameter of 2-1/8 inches and a wall thickness of 0.058 inches, providing a working balance of strength and ease of installation for pressure-rated systems. Designed for above-ground potable water systems, heating loops, and general plumbing, Type M copper offers a cost-effective solution where permitted by local code. The tube is incised-marked and red color-coded for identification and verification on-site. Product Specifications: Tube Type: Type M (Hard Drawn) Nominal Size: 2 inch Outside Diameter: 2-1/8 inch Wall Thickness: 0.058 inch Length: 10 feet Material: UNS C12200 copper (deoxidized with phosphorus) Weight: Approximately 1.46 lbs/ft Standards Compliance: ASTM B88, NSF 61/372 Markings: Incised for traceability and color-coded red per type classification Application Notes: Use Case: Designed for residential and commercial water supply systems, hydronic heating, and other low- to moderate-pressure plumbing installations where Type M is allowed by code Connection Methods: Suitable for soldering, brazing, or mechanical fittings Installation Requirement: Must comply with local and national plumbing codes Key Advantages: ASTM B88 Compliance – Ensures pressure and dimensional uniformity Cost-Efficient Material Use – Lighter wall than Type L, appropriate for many standard pressure water systems Corrosion Resistance – Inherent to copper for long-term reliability Job Site Ready – Clearly marked and color-coded for quick selection and inspection

Specifications

Specifications Weight 10.600000 Length (inches) 8.88 Width (inches) 2.125 Height (inches) 8.88 Item Type Copper Tubing Brand Non-Specified Brand Form Straight Line Set Insulation Type Single Line Insulated Manufacturer Non Specified Manufacturer MPN MH20010 Max Pressure 514 psi Outside Diameter 2-1/8 in Pipe Wall Type Hard Sub Type Plumbing Water Tube Nominal Size 2 in Wall Thickness 0.058 in Material Copper Application Potable Water Item Returns This item can be returned

Buying Information

Confirm model MH20010 and the listed specifications against the existing component before ordering.

Brand

Non-Specified Brand

MPN

MH20010

0
Scroll to Top