2 Inch PVC DWV Cleanout Tee – Hub x Hub x Female Thread
The 2 inch PVC DWV Cleanout Tee is a molded fitting designed for use in drain, waste, and vent (DWV) systems to provide cleanout access to horizontal drainage lines. It features two hub (slip) ends for solvent-weld connections and a third branch with a female-threaded outlet that accommodates a cleanout plug for maintenance access.
Product Features and Functional Advantages
This fitting provides a convenient location for snaking or flushing lines and is typically installed in accessible locations within the piping network. The 90° side branch with threaded access meets plumbing code requirements for system serviceability.
- ✅Cleanout Access IntegrationCombines a tee fitting with a threaded cleanout for easy maintenance and inspection.
- ✅Schedule 40 PVC ConstructionRigid, corrosion-resistant material designed for non-pressurized DWV applications.
- ✅Hub x Hub x FPT ConfigurationTwo solvent-weld sockets for inline pipe connections and one female NPT outlet for threaded plug installation.
- ✅Standards-Compliant DesignConforms to ASTM D2665 and D3311 for dimensional accuracy and flow characteristics.
Technical Specifications
- Size2 inch nominal
- MaterialWhite PVC (Polyvinyl Chloride)
- Connection TypeHub x Hub x Female Threaded (FIPT)
- StandardsASTM D2665, D3311; NSF 14 Certified
- ApplicationDWV systems (non-pressurized)
Installation Guidelines
Solvent-welded connections require use of PVC primer and cement. All pipe ends should be clean, square-cut, and deburred before joining. The threaded cleanout outlet should be fitted with an approved cleanout plug (not included) using appropriate thread sealant or tape. Installation must follow code-mandated spacing for cleanout access.
Common Use Cases
This cleanout tee is used in horizontal DWV runs such as branch lines, main stacks, or near fixtures to allow for future access without pipe disassembly. Commonly installed in walls, basements, or crawl spaces where cleanout access is required by code.
Code and Regulatory Compliance
This fitting is listed for DWV system use and is not suitable for pressurized or potable water applications. It complies with national model plumbing codes (UPC/IPC) and meets NSF 14 certification requirements for DWV fittings.
The 2 inch PVC DWV Cleanout Tee provides a durable, accessible, and code-approved solution for maintaining drain system integrity. Its solvent-weld hubs and threaded outlet support secure, long-lasting performance in professional-grade installations.




