2 inch x 1-1/4 inch PVC DWV Reducing Bushing – Socket Fitting for Gravity Drainage Systems
The2 inch x 1-1/4 inch PVC DWV Reducing Bushingis a molded transition fitting used to reduce pipe size within non-pressurized drain, waste, and vent (DWV) systems. Constructed from rigid polyvinyl chloride (PVC), this fitting is engineered for solvent-weld installations in horizontal or vertical pipe runs where a size transition is required.
Designed in accordance with ASTM D2665 and D3311, this bushing features a spigot end for insertion into a 2 inch hub and a socket end to receive 1-1/4 inch pipe. The configuration ensures smooth internal flow and consistent alignment with downstream components, minimizing flow resistance and turbulence in DWV assemblies.
Product Attributes
- ✅Material SpecificationPVC Type I, Grade I per ASTM D1784 (Cell Class 12454)
- ✅Connection TypeSpigot x Socket – Designed for solvent cement joints
- ✅Dimensional StandardCompliant with ASTM D2665 and applicable sections of ASTM D3311
- ✅Operating RangeNon-pressure DWV applications up to 140°F (60°C)
- ✅Installation OrientationSuitable for vertical and horizontal piping layouts in compliance with IPC/UPC code
Technical Specifications
- Nominal Sizes2 inch spigot x 1-1/4 inch socket
- System TypeDWV (Drain, Waste, and Vent)
- Fitting TypeReducing Bushing
- MaterialSchedule 40 PVC
- StandardsASTM D2665, ASTM D1784, NSF/ANSI 14
Installation Notes
All surfaces must be dry and free of debris before priming and solvent welding. Use primer and PVC cement conforming to ASTM F656 and F493. Insert fully and hold briefly to ensure capillary seal integrity. Cure times vary by temperature and pipe diameter. This fitting is not suitable for pressurized or hot water applications.
Application Overview
Typically used in DWV systems for reducing transitions at fixture arms, branch drains, or stack connections. Common in residential and light commercial projects where code-compliant material and dimensional stability are required for gravity-fed drainage systems.
Regulatory Compliance
This product meets IPC and UPC code requirements for DWV use and is third-party certified to NSF/ANSI Standard 14 for plastic piping system components. It does not contain lead and is approved for use in building drainage systems as defined under local plumbing regulations.




