Skip to content
Need help identifying a part? Contact parts support
SKU: 1857695Brand: Non-Specified Brand
,

2 inch x 2 inch x 1-1/2 inch Copper Reducing Press Tee Copper x Copper x Copper

$18.25

2 inch x 2 inch x 1-1/2 inch Copper Reducing Press Tee – Lead-Free, Press Connection The 2 inch x 2 inch x 1-1/2 inch copper reducing press tee is a lead-free fitting designed for use in potable water, hydronic heating, and commercial plumbing systems.

Quantity
SKU: 1857695 Categories: ,

2 inch x 2 inch x 1-1/2 inch Copper Reducing Press Tee – Lead-Free, Press Connection

The 2 inch x 2 inch x 1-1/2 inch copper reducing press tee is a lead-free fitting designed for use in potable water, hydronic heating, and commercial plumbing systems. It provides a secure, mechanical press-fit connection that enables branching from a 2 inch main line to a 1-1/2 inch lateral outlet. Manufactured from wrought copper, this tee supports reliable fluid distribution while maintaining dimensional stability and flow efficiency.

Application and Performance Standards

This press tee is produced in accordance with ASME B16.51 and complies with NSF/ANSI 61 and NSF 372 for use in lead-free potable water systems. The press ends are compatible with standard press tools and jaws (e.g., V-profile), and create a permanent connection once crimped. Key design features include

  • ✅MaterialWrought Copper (typically ASTM B75 or B88 alloy)
  • ✅Connection TypePress x Press x Press (reducing branch)
  • ✅Size2 inch x 2 inch x 1-1/2 inch nominal
  • ✅Lead-FreeCertified to NSF 61/372 for drinking water applications
  • ✅Pressure RatingUp to 200 psi (depending on system and press tool compliance)

Installation Requirements

Installation must be performed using manufacturer-approved press tools and jaws. Pipe ends must be deburred and marked to indicate full insertion depth before pressing. Connections should be dry-fit to ensure alignment, and all joints must be visually inspected for proper crimp before system pressurization. No heat, solder, or adhesives are required, reducing labor time and increasing jobsite safety.

Common Use Cases

This fitting is used in multi-branch plumbing layouts, manifold supply systems, and riser piping configurations where a reduction from a 2 inch main to a 1-1/2 inch takeoff is needed. Suitable for both horizontal and vertical installations in new construction or retrofit work.

Code Compliance Note

All copper press fittings used in potable water systems must meet lead-free requirements as specified by the Safe Drinking Water Act. This press tee conforms to current IPC, UPC, and state-level plumbing code standards for residential and commercial buildings.

Manufacturing and Inspection

Each press tee is inspected for dimensional accuracy, wall thickness, and press groove integrity. Final assemblies are tested in accordance with applicable mechanical joint standards to ensure leak-free performance under typical pressure and temperature conditions in building mechanical systems.

Specifications

Specifications Weight 1.260000 Brand Non-Specified Brand ADA Compliance No Application Potable Water, Hydronic Heating (with Glycol), Chilled Water, Compressed Air (200 psi Max), Non-Medical Gases (140 psi Max), Low Pressure Steam (15 psi Max), Vacuum (24.5 in Mercury Max at 68 deg F) Length (inches) 11.15 Width (inches) 5.9 Height (inches) 4.7 End Style Copper x Copper x Copper Side A 2″ Side B 2″ Side C 1-1/2″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN PF 40103 Material Copper Product Family Fittings Warranty 50 Years Limited Item Returns This item can be returned

Buying Information

Match PF 40103 to the existing component before ordering

Brand

Non-Specified Brand

MPN

PF 40103

0
Scroll to Top