Skip to content
Need help identifying a part? Contact parts support
SKU: 6150Brand: Non-Specified Brand
,

2 inch x Close Brass Nipple

$7.53

2″ x Close Brass Nipple – Lead-Free Threaded Connector for Potable and General Service Lines The 2″ x Close brass nipple is a short-length, male-threaded fitting designed to provide a compact transition between female-threaded components in piping systems.

Quantity

2″ x Close Brass Nipple – Lead-Free Threaded Connector for Potable and General Service Lines

The 2″ x Close brass nipple is a short-length, male-threaded fitting designed to provide a compact transition between female-threaded components in piping systems. Fabricated from lead-free brass, this component meets requirements for use in potable water applications and complies with federal and state low-lead regulations, including NSF/ANSI 61 and 372 certifications.

Its close design (threaded nearly end-to-end with minimal unthreaded length) allows for tight installations where space is constrained. Precision-cut NPT threads ensure proper sealing when installed with approved joint compounds or PTFE tape, supporting a leak-resistant joint under pressure.

Product Attributes and Advantages

  • ✅MaterialLead-free brass (compliant with ≤0.25% lead content regulations)
  • ✅Nominal Size2 inches
  • ✅TypeClose nipple (minimal exposed body between threads)
  • ✅ConnectionMale NPT x Male NPT (per ANSI B1.20.1 threading standard)
  • ✅Corrosion ResistanceSuitable for use in potable water, air, and non-corrosive fluid systems

Installation Guidelines

Due to its short overall length, care must be taken when threading the close nipple to avoid over-tightening or misalignment. Use of non-hardening pipe sealant or approved PTFE tape is recommended to ensure a pressure-tight seal. Proper wrench engagement should be maintained to avoid damage to the fitting or mating component.

Common Applications

This fitting is frequently used in

  • Potable water supply systems
  • Equipment connections in plumbing assemblies
  • Water heater and manifold installations
  • Branch line tie-ins for mixing valves and backflow preventers

Regulatory Note

Lead-free brass components are required for drinking water applications in accordance with the Safe Drinking Water Act (SDWA). The 2″ x Close brass nipple is NSF 61/372 certified for contact with potable water and is suitable for installation in residential, commercial, and institutional systems.

The 2″ x Close brass nipple offers a compact and code-compliant solution for short-span threaded connections where reliability and corrosion resistance are essential. Its lead-free composition and precise machining support long-term performance across a range of mechanical and water distribution applications.

Specifications

Specifications Weight 0.025000 Brand Non-Specified Brand ADA Compliance No Length (inches) 1.88 Width (inches) 2 Height (inches) 2.25 Side A 2″ Side B Close Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN NBR08CL Material Brass Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and connection details for MPN NBR08CL before ordering.

Brand

Non-Specified Brand

MPN

NBR08CL

0
Scroll to Top