Honeywell V8043E1061 Zone Valve – 3/4″ Sweat, 24V Two-Way On/Off, Normally Closed
The Honeywell V8043E1061 is a two-position, low-voltage motorized zone valve designed for use in hydronic heating systems. It regulates hot water flow with a normally closed, straight-through valve body. This model features 3/4″ sweat connections and operates on 24V AC power, making it suitable for residential or light commercial zoning applications.
Key Features
- ActuationTwo-way valve opens when powered, spring-returns to closed position when de-energized
- Manual LeverIntegrated manual opener allows for system fill or manual override during power loss
- End SwitchNot included with this model – for end switch versions, see V8043F series
- Replaceable PowerheadActuator can be serviced or replaced without disturbing plumbing connections
- Installation OrientationInstall with actuator in a horizontal position to prevent moisture ingress
Technical Specifications
- Model NumberV8043E1061/U
- Connection Size3/4″ sweat
- Voltage24V AC, 50/60 Hz
- Valve Body PatternStraight-through
- Flow Coefficient (Cv)8.0
- Maximum Fluid Temperature200°F (93°C)
- Close-Off Pressure20 PSI maximum
Installation Considerations
This valve is designed for closed-loop hydronic heating systems and should be installed in accordance with local codes. Ensure system is depressurized and drained before soldering connections. Electrical termination is made via a screw terminal block. Always follow wiring diagrams provided by the manufacturer to ensure compatibility with zone panels or thermostats.
Contractor Notes
- Manual lever simplifies system purging during startup or service
- Actuator removal does not require draining the piping circuit
- Suitable for use with thermostatically controlled zone relay systems
- Use dielectric unions if installed on mixed-metal piping systems
Applications
- Residential hot water baseboard heating
- Zoned radiant floor heating systems
- Fan coil unit isolation in low-voltage systems
Specifications
Buying Information
Confirm the listed Honeywell V8043E1061/U identifier and configuration match your application before ordering.




