Details
Model0010-MSF2-IFC
ManufacturerTaco Comfort Solutions
Product Name3-Speed Cartridge Circulator Pump with Integral Flo-Chek
Part Number1864825
Series0010
Flow Rate29 GPM
Head RangeUp to 10.5 Feet
Horsepower1/20 HP
Electrical Rating115 VAC, 1.10 A, 60 Hz
Connection Type3/4 inch Flange Inlet × 1-1/2 inch Flange Outlet
Maximum Pressure125 PSI
Temperature Range40°F to 230°F (4°C to 110°C)
Product Overview
The Taco 0010-MSF2-IFC Circulator Pump is a professional-grade, 3-speed cartridge-type circulator designed for hydronic heating and cooling systems. Engineered for flexible system performance, it integrates an internal Flo-Chek valve to prevent gravity circulation, ensuring controlled system operation. The three-speed motor design enables field adjustment for precise system balancing and optimal flow matching. The 0010 Series is an ideal service and retrofit pump solution, offering universal flange compatibility and efficient installation for both residential and light commercial hydronic systems.
Technical Specifications
- Manufacturer Part Number0010-MSF2-IFC
- Series0010 Multi-Speed
- Product TypeCartridge Circulator with Integral Flow Check
- Motor TypePermanent-split capacitor, thermally protected
- Horsepower1/20 HP
- Voltage115 VAC
- Amperage1.10 A
- Frequency60 Hz
- Motor Speed3250 RPM
- Speed Selection3-Speed Manual Selector (Low / Medium / High)
- Flow Capacity29 GPM maximum
- Head Range0–10.5 feet
- Connection Size3/4 inch inlet × 1-1/2 inch outlet (flanged)
- Flange Compatibility4-bolt universal flange configuration fits most models
- Maximum Working Pressure125 PSI (862 kPa)
- Maximum Operating Temperature230°F (110°C)
- Minimum Operating Temperature40°F (4°C)
- Body MaterialCast iron (standard)
- Impeller MaterialNon-metallic, corrosion-resistant composite
- Seal TypeEPDM O-ring with replaceable cartridge design
- BearingsPermanently lubricated, maintenance-free design
- Check ValveIntegral Flo-Chek to prevent backflow and gravity circulation
- Mounting OrientationStandard horizontal motor mount
- Dimensions6-11/16 inch Length × 6-3/8 inch Height
- WeightApprox. 9 lbs
- CertificationsUL and CSA listed
- ApplicationsHydronic heating, radiant panels, baseboard loops, fan coils, and zone circulation
Installation Notes
- Isolate system pressure and ensure complete drainage before pump installation or service.
- Mount with motor shaft in horizontal position for proper bearing lubrication.
- Install with flow arrow matching system direction; verify check valve orientation for return flow prevention.
- Use supplied flange gaskets and hardware for secure, leak-free connection.
- Set pump speed during system commissioning to match design flow and minimize energy draw.
- Inspect and clean system prior to start-up to prevent debris from damaging impeller or seal surfaces.
Summary
The Taco 0010-MSF2-IFC 3-Speed Circulator with Integral Flo-Chek provides professional contractors with a robust, service-ready pump for hydronic systems requiring adjustable performance. Featuring a universal four-bolt flange, cast-iron body, and maintenance-free cartridge design, it delivers consistent flow, simplified installation, and reliable operation across a range of heating and cooling applications.
Specifications
Buying Information
Confirm the listed Taco 0010-MSF2-IFC identifier and configuration match your application before ordering.




