Skip to content
Need help identifying a part? Contact parts support
SKU: 1944632Brand: WATTS
,

3/4″ Lead Free Temperature and Pressure Relief Valve, Male x Female

$16.58

Watts 3/4″ Lead-Free T&P Valve – Reliable Safety for Water Heater Systems Engineered to protect water heaters and storage tanks from excessive temperature and pressure, the Watts 3/4″ Lead-Free Temperature and Pressure Relief Valve is a critical safety component in any hydronic or…

Quantity
SKU: 1944632 Categories: ,

Watts 3/4″ Lead-Free T&P Valve – Reliable Safety for Water Heater Systems

Engineered to protect water heaters and storage tanks from excessive temperature and pressure, the Watts 3/4″ Lead-Free Temperature and Pressure Relief Valve is a critical safety component in any hydronic or potable hot water system. This ASME-rated valve discharges when temperature exceeds 210°F or pressure surpasses 150 psi, helping prevent equipment failure and potential hazards.

Designed for long-term performance in demanding applications, the valve features a robust brass body, stainless steel spring, and an epoxy-coated thermostat for corrosion resistance and accuracy. It complies with ANSI Z21.22 and CSA standards, making it a dependable solution for code-compliant installations.

Product Features

  • Lead-Free Brass Body– Certified to NSF/ANSI 372; safe for use in potable water systems
  • 210°F / 150 psi Relief Settings– Standard safety thresholds for most residential and light commercial heaters
  • Epoxy-Coated Thermostat– Bonded for precise thermal response and long service life
  • Extended Shank Design– Accommodates tanks with thick insulation for a proper seat
  • Stainless Steel Spring– Provides reliable valve operation under high-pressure conditions
  • Manual Test Lever– Facilitates system checks and ensures the valve remains operational over time

Technical Specifications

  • Connection Size3/4″ MNPT inlet x 3/4″ FNPT outlet
  • Body MaterialLead-free brass
  • Relief Temperature210°F
  • Relief Pressure150 psi
  • MediaWater only
  • CertificationASME Section IV; CSA certified

Installation Guidance

This T&P valve should be installed in the designated port on a water heater or storage tank, with the discharge pipe directed downward and piped to within 6″ of the floor or a suitable drain. Use of thread sealant (not pipe dope) is recommended. Installation should be handled by a licensed plumber to ensure compliance with all local codes and safety standards.

For the Professional Installer

This valve is a staple on job sites where code compliance and product reliability are non-negotiable. Its robust design minimizes callbacks and ensures long-term system protection. The extended shank version is especially beneficial when retrofitting newer tanks with thicker foam insulation.

Specifications

Specifications Weight 0.670000 Length (inches) 0.1 Width (inches) 12.9 Height (inches) 15 Item Type Relief Valves Brand WATTS Manufacturer Watts Water Technologies, Inc. MPN 556003 Sub Type Spring Operated Body Material Brass End Style MNPT x FNPT Nominal Size 3/4 in Pressure Rating 150 PSI Application Water Heater, Hot Water Storage Tank Series LF100XL Item Returns This item can be returned
Brand

WATTS

MPN

556003

0
Scroll to Top