Skip to content
Need help identifying a part? Contact parts support
SKU: 6996Brand: Non-Specified Brand
,

3/4 inch PVC Schedule 40 90 Degree Street Elbow Fitting x Plastic

$0.41

3/4 inch PVC Schedule 40 90° Street Elbow – Socket x Spigot for Directional Change The 3/4 inch PVC Schedule 40 90 Degree Street Elbow is designed for solvent-welded directional transitions in pressure and non-pressure water systems.

Quantity
SKU: 6996 Categories: ,

3/4 inch PVC Schedule 40 90° Street Elbow – Socket x Spigot for Directional Change

The 3/4 inch PVC Schedule 40 90 Degree Street Elbow is designed for solvent-welded directional transitions in pressure and non-pressure water systems. This elbow features a socket x spigot (street) configuration, allowing it to connect directly into another socket fitting without requiring an additional pipe segment.

Engineered from rigid polyvinyl chloride (PVC), this fitting provides a durable solution for making sharp 90-degree directional changes while maintaining consistent internal diameter alignment. It is suitable for both cold water distribution and irrigation applications where material compatibility, dimensional precision, and chemical resistance are essential.

Product Features

  • ✅Socket x Spigot (Street) Design– Enables compact 90° turns and direct insertion into another fitting without needing a pipe stub.
  • ✅Schedule 40 Wall Thickness– Rated for systems conforming to ASTM D2466 standards, suitable for pressure and drain line configurations.
  • ✅Corrosion and Chemical Resistance– PVC construction resists degradation from common acids, alkalis, and environmental factors.
  • ✅Smooth Interior Surface– Minimizes friction loss and supports consistent flow through directional changes.

Specifications

  • Nominal Size3/4 inch
  • MaterialPVC (Polyvinyl Chloride)
  • Schedule40
  • Connection EndsSocket x Spigot
  • ComplianceConforms to ASTM D2466 and NSF 14; suitable for potable water when listed

Installation Guidance

Install with approved PVC primer and solvent cement. Ensure all mating surfaces are clean, dry, and square-cut before assembly. Insert the spigot end fully into the socket of the receiving fitting and hold in position per cement manufacturer instructions. Support fittings per applicable plumbing code and allow for full curing before system pressurization.

Typical Use Cases

Primarily used in irrigation, cold water supply lines, and low-pressure drain systems. This fitting is common in residential, light commercial, and agricultural applications where directional transitions in tight spaces are required without adding additional couplings or pipe sections.

Regulatory and Code Compliance

Only use in systems where Schedule 40 fittings are permitted. For potable water, ensure product markings include NSF 61 or NSF-pw certification to meet local regulatory requirements.

The 3/4 inch PVC Schedule 40 Street Elbow delivers a compact, secure solution for right-angle directional changes in solvent-welded PVC piping systems. Its spigot end simplifies layout and reduces fitting count in confined system designs.

Specifications

Specifications Weight 0.070000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Length (inches) 2.14 Width (inches) 1.31 Height (inches) 2 End Style Plastic x Plastic Side A 3/4″ Side B 3/4″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN 409-007 Material PVC Schedule 40 Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed elbow configuration and MPN before ordering.

Brand

Non-Specified Brand

MPN

409-007

0
Scroll to Top