Skip to content
Need help identifying a part? Contact parts support
SKU: 1952203Brand: Non-Specified Brand
,

3/4 inch Stainless Steel Square Head Plug

$1.05

3/4 Inch Stainless Steel Square Head Plug – NPT Threaded The 3/4 inch Stainless Steel Square Head Plug is a threaded closure fitting designed for sealing the end of a female NPT-threaded pipe or fitting in pressurized and non-pressurized systems.

Quantity
SKU: 1952203 Categories: ,

3/4 Inch Stainless Steel Square Head Plug – NPT Threaded

The 3/4 inch Stainless Steel Square Head Plug is a threaded closure fitting designed for sealing the end of a female NPT-threaded pipe or fitting in pressurized and non-pressurized systems. Constructed from corrosion-resistant stainless steel, this plug is used in fluid handling applications where chemical resistance and mechanical strength are critical.

Material and Standards

Manufactured from Type 304 or 316 stainless steel, this plug provides high resistance to rust, scaling, and chemical exposure. Threads are machined to ANSI/ASME B1.20.1 standards, ensuring compatibility with standard NPT fittings. The square head allows installation and removal with a wrench in limited-access areas.

  • ✅Material304 or 316 Stainless Steel (verify per application)
  • ✅Size3/4 inch nominal pipe size
  • ✅Thread TypeMale NPT, ANSI/ASME B1.20.1
  • ✅Head TypeSquare head for wrench tightening

Applications

Used in process piping, mechanical systems, and general-purpose plumbing to terminate or temporarily seal open pipe ends. Commonly installed in water distribution systems, compressed air networks, and chemical process lines where periodic access or testing may be required.

Installation Guidelines

Apply PTFE tape or approved thread sealant to the male threads to ensure leak resistance. Tighten using an appropriately sized wrench on the square head, avoiding overtightening to preserve thread integrity. Suitable for vertical or horizontal installations where access permits.

  • ✅Sealant UseRequired on NPT threads to ensure leak-free installation
  • ✅ToolingCompatible with standard open-end or adjustable wrenches
  • ✅ReusabilityCan be removed and reused for inspection or pressure relief applications

Performance Attributes

  • ✅Corrosion ResistanceWithstands harsh environments including potable water, steam, and light chemical service
  • ✅Pressure RatingDependent on system design, pipe schedule, and installation conditions (typically 150–300 PSI)
  • ✅Temperature Range20°F to 400°F (varies by grade and media)

The 3/4 inch Stainless Steel Square Head Plug is a durable, corrosion-resistant solution for sealing threaded pipe ends in high-integrity plumbing and mechanical systems. Designed for performance in both commercial and industrial environments, it provides a secure seal with long-term reliability in service.

Specifications

Specifications Weight 0.140000 Brand Non-Specified Brand ADA Compliance No Length (inches) 0.95 Width (inches) 0.95 Height (inches) 1.1 Side A 3/4″ Fitting Type Plugs Item Type Fittings Manufacturer Non Specified Manufacturer MPN SSF304SP04 Material Stainless Steel Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size, connection, or rating details for MPN SSF304SP04 before ordering.

Brand

Non-Specified Brand

MPN

SSF304SP04

0
Scroll to Top