3/4 Inch x 1/2 Inch Copper Press Reducing Coupling – Lead-Free, High-Performance Fitting
The 3/4 inch x 1/2 inch copper press reducing coupling provides a transition between dissimilar pipe diameters in press-connect systems. It is designed for use in potable water, hydronic heating, and mechanical piping systems that require reliable, flame-free connections. This coupling supports consistent sealing performance under both static and dynamic system conditions.
Material and Construction Standards
Manufactured from lead-free copper in accordance with ASTM B75 or equivalent, this reducing coupling incorporates press ends with factory-installed sealing elements. The design allows for quick installation while maintaining code compliance and mechanical integrity
- ✅Press TechnologyCold-formed sockets with integrated EPDM sealing elements ensure a leak-resistant joint without the need for soldering or flame.
- ✅Pressure RatingSuitable for operating pressures up to 200 PSI when installed per manufacturer and code requirements.
- ✅Lead-Free CertificationConforms to NSF/ANSI 61 and 372 standards for potable water systems.
Installation Guidelines
Preparation of copper pipe ends should include proper cutting and deburring to avoid damaging the sealing elements. Mark insertion depths according to press system standards. Use approved press tools with properly calibrated jaws to ensure full compression of the coupling. Visual and tactile inspection of press indicators is recommended post-installation.
Application Scope
This fitting is commonly used in residential and commercial systems where pipe size transitions are required, such as manifold branches, fixture stub-outs, or service line reductions. It is ideal for projects where open flame is prohibited or where installation speed is critical.
Material Performance Note
Copper press fittings offer superior corrosion resistance and thermal conductivity, making them suitable for both hot and cold water service. The press connection method also reduces installation time and minimizes labor costs on site.
Key Technical Specifications
- MaterialLead-Free Copper
- Size3/4 inch x 1/2 inch nominal pipe size
- Connection TypePress x Press
- Seal TypeEPDM O-ring (pre-installed)
- Standards ComplianceASTM B75, NSF/ANSI 61 & 372, ASME B16.51
The 3/4 inch x 1/2 inch Copper Press Reducing Coupling is a code-compliant solution for reducing pipe diameter in water distribution and mechanical systems. Specify this fitting where a secure, flame-free installation is required, and where long-term performance under pressure is essential.
Specifications
Buying Information
Confirm the listed size and connection details for MPN PF 01326 before ordering.




