3/4″ x 3-1/2″ Stainless Steel Pipe Nipple – Threaded Connector for Corrosion-Resistant Systems
The3/4″ x 3-1/2″ Stainless Steel Nippleis a Schedule 40 pipe fitting with male National Pipe Thread (NPT) ends on both sides, designed to extend pipe runs or connect fittings in high-demand fluid handling systems. Made from corrosion-resistant stainless steel, this nipple is suitable for use in potable water, chemical, and industrial applications where material integrity and long service life are essential.
It is manufactured to precise dimensional tolerances and pressure ratings consistent with ASME B1.20.1 thread standards and ASTM A312 or A733 material specifications, depending on manufacturer. The 3-1/2″ length provides a compact solution for tight installations or short span connections.
Product Features
- ✅MaterialStainless Steel, typically Type 304 or 316 for superior corrosion resistance
- ✅Full NPT ThreadsMachined to ANSI/ASME B1.20.1 for leak-resistant, tapered engagement with compatible fittings
- ✅Schedule 40 Wall ThicknessSuitable for moderate pressure and temperature service in industrial and potable water systems
- ✅Non-Galvanic PerformanceIdeal for systems where contact with dissimilar metals must be minimized to reduce electrochemical reaction
Technical Specifications
- Nominal Size3/4 inch
- Length3-1/2 inches (overall including threaded ends)
- Connection TypeNPT Male x NPT Male
- Standard ComplianceASTM A733 / A312, ANSI/ASME B1.20.1
Installation Guidelines
Use thread sealant or PTFE tape appropriate for the system medium (e.g., water, air, steam, or corrosive fluids). Align fittings carefully to prevent cross-threading and apply proper torque to avoid damage to threads. Stainless steel threads may require anti-galling lubricant in some applications.
Common Applications
Installed in potable water lines, food-grade processing systems, hydronic piping, industrial fluid transfer systems, and environments exposed to chemical agents or high moisture. Also applicable in marine, laboratory, and pharmaceutical installations requiring non-reactive, corrosion-resistant materials.
Code & Safety Note
Stainless steel fittings meet NSF/ANSI 61 when specified and are often approved for use in drinking water systems. Confirm compatibility with system materials and local jurisdictional codes during design and installation.
The3/4″ x 3-1/2″ Stainless Steel Pipe Nippleprovides a dependable, corrosion-resistant threaded connection for use in high-performance systems requiring long-term reliability and dimensional precision.
Specifications
Buying Information
Confirm the listed size and connection details for MPN SSN30404312 before ordering.




