Skip to content
Need help identifying a part? Contact parts support
SKU: 6117Brand: Non-Specified Brand
,

3/4 inch x 5 inch Brass Nipple

$4.25

3/4″ x 5″ Brass Nipple – Lead-Free, Threaded Pipe Fitting The 3/4″ x 5″ brass nipple is a straight pipe fitting with male NPT threads on both ends, designed to connect female-threaded components in pressure-rated piping systems.

Quantity

3/4″ x 5″ Brass Nipple – Lead-Free, Threaded Pipe Fitting

The 3/4″ x 5″ brass nipple is a straight pipe fitting with male NPT threads on both ends, designed to connect female-threaded components in pressure-rated piping systems. Manufactured from lead-free brass in accordance with ASTM and ANSI standards, it is suitable for potable water, air, and other non-corrosive fluid systems.

This fitting is used to extend piping runs, provide spacing between components, or connect valves, couplings, and other fittings. Its corrosion-resistant properties and dimensional consistency make it appropriate for both residential and commercial installations.

Key Performance Features

  • ✅MaterialLead-free brass (typically UNS C69300 or equivalent), compliant with NSF/ANSI 61 and 372 for potable water use.
  • ✅Thread TypeNational Pipe Taper (NPT) threads on both ends, machined to ANSI/ASME B1.20.1 for sealing reliability.
  • ✅Corrosion ResistanceBrass resists dezincification and oxidation in fluid and air systems.
  • ✅Standard Length5″ overall length for use in spacing, offsets, and system tie-ins.
  • ✅Pressure ServiceRated for use in moderate-pressure systems depending on media, temperature, and wall thickness.

Installation Considerations

Install using thread sealant or PTFE tape to prevent leakage. Use pipe wrenches on unthreaded sections to avoid thread deformation. Confirm that the fitting material is compatible with the media in service and that installation complies with applicable local codes and plumbing system design requirements.

Common Applications

Typical installations include domestic water supply systems, compressed air lines, and utility piping in both residential and commercial buildings. This fitting is frequently used in meter connections, fixture branches, and between valves and manifold systems.

Material Compliance

Lead-free brass nipples are required in potable water systems by the Safe Drinking Water Act (SDWA) and certified under NSF/ANSI 61 and NSF/ANSI 372. These certifications ensure material safety and code acceptance for drinking water distribution systems.

Technical Specifications

  • Nominal Size3/4″ NPT
  • Length5″
  • MaterialLead-Free Brass
  • Thread StandardANSI/ASME B1.20.1 NPT Male x Male
  • StandardsASTM B687, NSF/ANSI 61 & 372

The 3/4″ x 5″ brass nipple is engineered for use in pressure-rated systems requiring corrosion resistance, lead-free compliance, and reliable threaded connections. Suitable for professional-grade installations in both new construction and retrofit work.

Specifications

Specifications Weight 0.460000 Brand Non-Specified Brand ADA Compliance No Length (inches) 0.95 Width (inches) 1 Height (inches) 5.05 Side A 3/4″ Side B 5″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN NBR045 Material Brass Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size, connection, or rating details for MPN NBR045 before ordering.

Brand

Non-Specified Brand

MPN

NBR045

0
Scroll to Top