Argo Lo-Trim II Hydronic Baseboard Element – 6-Inch Heating Section
The Argo 55LT27-E-6 is a 6-inch copper tube/aluminum fin heating element designed for use in Lo-Trim II baseboard systems. This short-length element is suitable for applications where limited wall space or layout-specific termination is required. It integrates with standard Lo-Trim II enclosures and accessories to support perimeter hydronic heating systems.
Product Specifications
- Model55LT27-E-6
- Length6 inches (nominal)
- Tubing3/4 inch CTS copper
- FinsMechanically bonded aluminum
- Country of OriginDomestic
- WarrantyLimited
Component Overview
- Heat OutputProvides proportional BTU/hr output based on 180°F average water temperature and standard flow conditions (scaled from full-length performance rating of ~300 BTU/hr/ft).
- ConstructionCopper fin-tube heating element designed for use in low-temperature closed-loop hot water heating systems.
- ApplicationCompatible with Lo-Trim II galvanized steel enclosures; ideal for custom lengths, return sections, or terminal ends.
Installation Requirements
Installation should be completed by licensed HVAC or plumbing professionals. The element must be securely supported within the enclosure using approved hardware and properly piped to maintain system balance. This section is typically installed as part of a larger baseboard run and requires integration with matching Lo-Trim II enclosure components. Follow all applicable code requirements and manufacturer layout clearances to ensure performance.
Typical Applications
- Custom baseboard configurations requiring short-length heating elements
- Return ends or wall segments in perimeter zones with limited linear space
- Residential hydronic systems utilizing Lo-Trim II hardware and components




