3/4″ x 72″ Black Steel Nipple – Threaded Schedule 40 Pipe for High-Pressure Applications
The 3/4″ x 72″ Black Steel Nipple is a Schedule 40 welded steel pipe section with NPT threads on both ends, suitable for high-pressure fluid and gas conveyance. Manufactured to ASTM A53 or equivalent standards, this fitting is commonly used in industrial, commercial, and mechanical piping systems where durability and mechanical integrity are critical.
Technical Specifications
- Nominal Size3/4 inch
- Length72 inches (6 feet)
- MaterialWelded black steel (ASTM A53 Type E or S)
- Wall TypeSchedule 40
- EndsMale National Pipe Thread (NPT x NPT)
- Pressure RatingDependent on media, temperature, and system design
- Temperature RangeSuitable for ambient and elevated temperature services
- Application StandardsANSI B1.20.1 (threads), ASME B31.1/B31.3 piping systems
Primary Uses
Black steel nipples of this size and type are used to extend pipe runs or connect components in systems where corrosion resistance is not a primary requirement. Common installations include
- Natural gas and propane distribution lines
- Low- to medium-pressure steam and air piping
- Mechanical and HVAC piping systems
- Oil and petroleum service lines
Product Features
- ✅Threaded Ends– Cut to ANSI B1.20.1 specifications for compatibility with standard threaded fittings
- ✅Schedule 40 Wall Thickness– Suitable for general service pressure applications
- ✅Carbon Steel Construction– Provides structural strength and dimensional stability
- ✅Uncoated Finish– Ideal for use in gas lines where galvanization is not permitted
Installation Requirements
Thread sealant or PTFE tape should be applied to male threads prior to installation. Wrenches should be used with care to avoid thread deformation or over-tightening. Proper pipe support and alignment according to applicable codes (e.g., IPC, UPC, or local authority) are required to prevent mechanical strain on connections.
Note
This product is intended for non-potable systems. Black steel is not suitable for drinking water or corrosive environments unless otherwise treated or specified.
The 3/4″ x 72″ Black Steel Nipple is a durable, code-appropriate solution for professional-grade gas, oil, and HVAC piping projects. Engineered to meet stringent system specifications, this fitting provides consistent performance in demanding mechanical environments.
Specifications
Buying Information
Confirm the listed size, connection, or rating details for MPN 584-720HC before ordering.




