Argo Lo-Trim II Hydronic Baseboard Element – 8-Foot Heating Section
The Argo 55LT27-E-8 is an 8-Foot baseboard heating element from the Lo-Trim II hydronic series, engineered for use in closed-loop hot water heating systems. This section is designed to integrate within longer runs of Argo Lo-Trim II enclosures, offering targeted capacity and flexibility for corners, ends, or custom-length installations.
Product Construction & Materials
The element consists of a 3/4-inch copper tube with mechanically bonded aluminum fins for effective convective heat transfer. It is housed within a low-profile galvanized steel enclosure, coated with a durable white powder finish for corrosion resistance in residential environments. Compatible accessories such as end caps, couplings, and wall brackets are available for a complete installation.
Key Product Specifications
- Model55LT27-E-8
- Overall Length8 feet nominal
- Tubing Size3/4″ CTS (Copper Tubing Standard)
- Fin MaterialAluminum
- Tube MaterialCopper
- CabinetGalvanized steel
- FinishWhite powder coat (baked enamel)
- OriginDomestic
Performance Characteristics
- BTU OutputRated at approximately 300 BTU/hr per foot at 180°F average water temperature under standard flow conditions (estimate scaled for 8-foot length).
- Low-Profile DesignMaintains unobtrusive clearance along baseboard zones while providing consistent heat distribution.
- Quiet OperationSecure cradle mount and thermal expansion tolerance reduce noise associated with heating cycles.
Installation Guidelines
This element is designed for integration into Lo-Trim II baseboard systems and should be installed by licensed mechanical professionals. Proper mounting, water balancing, and clearance from finished flooring are critical to maintain system efficiency and ensure compliance with local building codes. System design must account for total BTU load, loop length, and head loss through all connected elements.
System Application
- Heating TypeHydronic (hot water)
- Use CaseCustom-length finishing sections, tight spaces, and detailed perimeter layouts
- Installation SitesResidential hydronic systems in single-family or multifamily dwellings
- Accessory CompatibilityWorks with Lo-Trim II end caps, splice plates, and wall mounting components
Specifications
Buying Information
Match 55LT27-E-8 to the existing installation and source specifications before ordering




