Skip to content
Need help identifying a part? Contact parts support
SKU: 331048Brand: Non-Specified Brand
,

3/4 inch Galvanized Steel Nipple Run (Close to 6 inch)

$6.68

3/4″ Galvanized Steel Nipple – Threaded Connection for Corrosion-Resistant Piping Systems The 3/4″ Galvanized Steel Nipple is a threaded pipe fitting designed for use in potable water, air, gas, and low-pressure steam systems.

Quantity
SKU: 331048 Categories: ,

3/4″ Galvanized Steel Nipple – Threaded Connection for Corrosion-Resistant Piping Systems

The 3/4″ Galvanized Steel Nipple is a threaded pipe fitting designed for use in potable water, air, gas, and low-pressure steam systems. Manufactured from carbon steel and hot-dip galvanized to ASTM A153 standards, this component offers extended service life and protection against corrosion in above-ground piping networks.

Each nipple is precision-machined with NPT (National Pipe Thread) tapered threads, ensuring a reliable, leak-resistant connection when used with compatible fittings. The galvanization process provides a uniform zinc coating that enhances durability and chemical resistance, making it suitable for demanding commercial and industrial applications.

Performance Characteristics

  • ✅MaterialCarbon steel pipe with hot-dip galvanized zinc coating for corrosion resistance
  • ✅Thread TypeANSI B1.20.1-compliant NPT male threads for mechanical compatibility and sealing integrity
  • ✅Nominal Size3/4 inch
  • ✅LengthCommonly manufactured in lengths from close nipple to 6″, with custom lengths available
  • ✅Operating PressureRated for use in low to medium pressure systems as defined by system parameters and pipe schedule

Application Areas

Galvanized steel nipples are typically used in hot and cold water distribution, fire sprinkler systems, compressed air lines, and outdoor installations where resistance to atmospheric corrosion is required. The 3/4″ size is widely used in residential and light commercial plumbing layouts, including vertical risers, branch connections, and temporary system extensions.

Installation Guidelines

Threaded galvanized nipples should be installed using approved thread sealants or PTFE tape to prevent leaks. Over-tightening must be avoided to prevent thread galling or deformation. Pipe wrenches or strap wrenches are recommended tools depending on the accessibility and required torque. For gas lines or critical water systems, torque specifications and local code compliance must be observed.

Technical Note

Galvanized pipe and fittings should not be used with acidic fluids or in closed-loop hydronic systems due to potential zinc leaching or scale formation. Compatibility with dissimilar metals, especially copper or brass, must be evaluated to avoid galvanic corrosion.

Compliance and Standards

  • Manufactured to ASTM A733 for pipe nipples
  • Zinc coating complies with ASTM A153
  • NPT threads per ANSI B1.20.1
  • Meets UPC and IPC requirements when installed per code

The 3/4″ Galvanized Steel Nipple offers durable performance in tough environments while meeting key standards for threaded plumbing systems. Designed for reliability and ease of integration, it is a preferred choice for contractors requiring long-term, code-compliant pipe connections.

Specifications

Specifications Weight 3.680000 Brand Non-Specified Brand ADA Compliance No Length (inches) 4.72 Width (inches) 3.93 Height (inches) 4.52 Side A 3/4″ Side B Run Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 564-000R Material Galvanized Steel Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and connection details for MPN 564-000R before ordering.

Brand

Non-Specified Brand

MPN

564-000R

0
Scroll to Top