3/8″ x 1/2″ MPT Push-Fit Adapter – Tool-Free Transition Fitting for Copper, CPVC, and PEX Systems
The 3/8″ push-fit x 1/2″ male pipe thread (MPT) adapter is a brass transition fitting designed for quick, mechanical connections between CTS tubing (copper, CPVC, or PEX) and standard threaded components. Engineered for use in potable water systems, it enables tool-free installation without soldering, crimping, or gluing. The integrated stainless steel grab ring and EPDM O-ring ensure reliable sealing under pressure.
Technical Specifications
- Body MaterialDZR brass (lead-free; complies with NSF/ANSI 61 and 372)
- Inlet Connection3/8″ CTS push-to-connect
- Outlet Connection1/2″ MPT (ANSI/ASME B1.20.1 male pipe thread)
- Seal MaterialEPDM O-ring, factory-lubricated
- Grip RingStainless steel teeth for axial retention
- Operating PressureUp to 200 psi
- Temperature Range33°F to 200°F (1°C to 93°C)
- CertificationsASSE 1061, NSF/ANSI 61 & 372, UPC, IPC, and CSA B125.3
Installation Notes
Cut CTS pipe squarely and deburr before insertion. Mark the proper insertion depth (typically 0.95″ for 3/8″ CTS) and push the pipe into the fitting until seated fully. No tools are required. Compatible with copper (Type K, L, M), CPVC (SDR-11), and PEX (ASTM F876/877) tubing. Verify local code acceptance and pressure test all connections per project specifications.
Application Scope
This push-fit adapter is commonly installed in
- Residential and light commercial potable water distribution systems
- Retrofitting copper or CPVC to threaded brass or iron fittings
- Service valve connections and fixture stub-outs
Material and Use Consideration
Push-to-connect fittings are suitable for concealed and exposed installations when installed according to manufacturer guidelines and local plumbing codes. Not recommended for use in continuous high-temperature closed-loop hydronic systems or steam applications.
Specifications
Buying Information
Verify the model, application, and listed specifications before ordering.




