Skip to content
Need help identifying a part? Contact parts support
SKU: 5728Brand: Non-Specified Brand
,

3/8 inch x 4-1/2 inch Black Steel Nipple

$0.90

3/8″ x 4-1/2″ Black Steel Nipple – Threaded Segment for Gas and Fluid Transfer Systems The 3/8″ x 4-1/2″ black steel nipple is a pre-threaded pipe segment used to connect two female-threaded black pipe components.

Quantity

3/8″ x 4-1/2″ Black Steel Nipple – Threaded Segment for Gas and Fluid Transfer Systems

The3/8″ x 4-1/2″black steel nipple is a pre-threaded pipe segment used to connect two female-threaded black pipe components. Manufactured from welded Schedule 40 black steel pipe, this fitting is engineered for structural strength and pressure resistance in mechanical and fuel gas systems.

Commonly used for short-distance connections, spacing offsets, or extensions in natural gas, propane, and compressed air systems, this nipple conforms to applicable industry tolerances and standards for reliable installation in residential, commercial, and light industrial environments.

Product Features

  • ✅Thread StandardNPT (National Pipe Taper), ANSI B1.20.1
  • ✅MaterialWelded black steel pipe, typically conforming to ASTM A53/A or A106 standards
  • ✅Wall ThicknessSchedule 40
  • ✅Connection EndsMale threads on both ends for compatibility with threaded iron pipe fittings
  • ✅Use CaseSuitable for gas distribution lines, compressed air systems, and non-potable water transport

Installation Requirements

Installation should follow standard threading practices using approved thread sealants such as PTFE tape or pipe joint compound rated for the service type (e.g., gas, air, or oil). Proper tightening torque must be applied to ensure a leak-resistant seal without damaging thread integrity. Always inspect threads for nicks or deformation prior to use.

Technical Specifications

  • Nominal Size3/8 inch
  • Length4-1/2 inches overall
  • Threaded EndsBoth ends, NPT
  • Operating PressurePressure rating dependent on system media and temperature; typically rated for up to 150 psi gas or 300 psi air/water in compatible systems

Applications

Commonly installed in black iron piping networks for heating, natural gas, fuel oil, and low-pressure steam distribution. Frequently used in boiler rooms, HVAC mechanical rooms, and commercial appliance connections. Not approved for potable water systems unless protected or coated according to local code.

Compliance Note

Meets standard mechanical and fuel gas installation codes for black steel piping systems. Always verify local jurisdictional requirements before use in regulated applications.

The3/8″ x 4-1/2″ Black Steel Nippledelivers reliable performance where precise threaded connections are required in rigid gas or air piping systems. Designed to meet professional-grade expectations for durability and code compliance.

Specifications

Specifications Weight 0.200000 Brand Non-Specified Brand ADA Compliance No Length (inches) 4.5 Width (inches) 0.38 Height (inches) 0.38 Side A 3/8″ Side B 4-1/2″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 582-045 Material Black Steel Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

582-045

0
Scroll to Top