Skip to content
Need help identifying a part? Contact parts support
SKU: 182829Brand: Charlotte Pipe
,

3 inch Cast Iron Soil 1/4 Bend No Hub x No Hub

$6.27

3 inch Cast Iron Soil 1/4 Bend No Hub – For DWV Systems in Commercial and Residential Construction The 3 inch no-hub cast iron soil bend is a 90-degree (1/4 bend) elbow designed for use in drain, waste, and vent (DWV) piping systems.

Quantity
SKU: 182829 Categories: ,

3 inch Cast Iron Soil 1/4 Bend No Hub – For DWV Systems in Commercial and Residential Construction

The 3 inch no-hub cast iron soil bend is a 90-degree (1/4 bend) elbow designed for use in drain, waste, and vent (DWV) piping systems. Manufactured in accordance with ASTM A888 and CISPI 301 standards, this fitting allows for a smooth directional change in horizontal or vertical piping runs without sacrificing flow performance. It features a no-hub connection suitable for use with shielded or unshielded couplings approved for cast iron piping systems.

Technical Specifications

  • Nominal Size3 inch
  • Bend Angle90 degrees (1/4 bend)
  • MaterialCast iron, ASTM A888-compliant
  • Connection TypeNo-hub (hubless), compatible with ASTM C1277 couplings
  • CertificationConforms to CISPI 301 and listed by IAPMO/UPC
  • ApplicationsNon-pressurized DWV systems only
  • Temperature RatingContinuous operation up to 212°F

Installation Guidelines

This fitting is designed for use with stainless steel banded couplings per ASTM C1277 or CISPI 310. Secure using torque-limiting tools to manufacturer-recommended settings (typically 60 in-lbs per clamp band). Ensure alignment and proper support per the International Plumbing Code or local code requirements. Not intended for pressurized systems or potable water conveyance.

Typical Applications

Used in

  • Horizontal-to-vertical transitions in sanitary drainage systems
  • Compact installations in multi-story residential and commercial buildings
  • Retrofitting and repair work in existing cast iron DWV stacks

Material Consideration

Cast iron offers high strength, rigidity, and acoustic dampening, making it suitable for installations requiring minimal noise transmission. It is naturally fire-resistant and exhibits superior performance in applications where longevity and system integrity are critical.

Specifications

Specifications Weight 4.490000 Brand Charlotte Pipe ADA Compliance No Angle 90 Deg Length (inches) 6.7 Width (inches) 6.65 Height (inches) 3.6 End Style No Hub x No Hub Side A 3″ Side B 3″ Fitting Type Bends Item Type Fittings Manufacturer Charlotte Pipe & Foundary Company MPN 141 Material Cast Iron Product Family Fittings Item Returns This item can be returned
Brand

Charlotte Pipe

MPN

141

0
Scroll to Top