Skip to content
Need help identifying a part? Contact parts support
SKU: 6982Brand: Non-Specified Brand
,

3 inch PVC Schedule 40 45 Degree Elbow Plastic x Plastic

$6.95

3 inch PVC Schedule 40 45-Degree Elbow – Built for Efficient Directional Flow The 3-Inch PVC Schedule 40 45-Degree Elbow is engineered for smooth directional transitions in non-pressurized drain, waste, and vent (DWV) systems.

Quantity
SKU: 6982 Categories: ,

3 inch PVC Schedule 40 45-Degree Elbow – Built for Efficient Directional Flow

The3-Inch PVC Schedule 40 45-Degree Elbowis engineered for smooth directional transitions in non-pressurized drain, waste, and vent (DWV) systems. Constructed from rigid polyvinyl chloride, this elbow provides a solvent-weld connection that facilitates a reliable 45-degree change in piping direction while maintaining system flow integrity.

Manufactured to conform withASTM D2466andNSF 14standards, this fitting is suitable for residential, commercial, and industrial DWV systems. Its uniform wall thickness and molded radius allow for efficient flow with minimal turbulence or pressure drop. The Schedule 40 rating makes it compatible with standard PVC DWV piping used in horizontal and vertical layouts.

Product Features

  • MaterialWhite Schedule 40 PVC – corrosion-resistant, non-toxic, and chemically inert
  • Size3-inch nominal
  • Angle45 degrees – for gradual redirection of flow
  • Connection EndsSlip x Slip (solvent weld sockets)
  • CertificationsASTM D2466, NSF compliant for DWV applications

Installation Information

This elbow is installed using standard PVC primer and solvent cement. Ensure all surfaces are properly cleaned and primed before bonding. The socket depth and bonding area are precision molded for strong adhesion and long-term reliability in DWV service conditions. Cure times vary depending on ambient temperature and humidity and should follow solvent manufacturer recommendations.

Common Applications

  • Non-pressurized residential and commercial DWV systems
  • Horizontal and vertical waste lines requiring direction changes
  • Plumbing system offsets in tight or limited-space configurations

Performance Advantages

  • Corrosion and chemical resistanceideal for long-term installations in harsh environments
  • Lightweight and easy to handlecompared to cast iron alternatives
  • Non-conductive and non-toxicsuitable for safe use in sanitary systems

Code and Usage Note

This fitting is intended for gravity-fed DWV systems and should not be used in pressurized water systems. Confirm local code compliance prior to use, especially in mixed-material systems or areas with specific venting layout requirements.

The3 inch PVC Schedule 40 45-Degree Elbowis a dependable solution for any plumbing layout requiring efficient directional changes. Its robust construction, code compliance, and ease of installation make it a practical choice for professionals aiming for consistent, long-lasting results.

Specifications

Specifications Weight 0.820000 Brand Non-Specified Brand ADA Compliance No Angle 45 Deg Length (inches) 6.74 Width (inches) 3.98 Height (inches) 3.98 End Style Plastic x Plastic Side A 3″ Side B 3″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN 417-030 Material PVC Schedule 40 Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

417-030

0
Scroll to Top