3 Inch x 1-1/2 Inch Black Iron Bushing – Threaded Reducing Fitting
The 3 inch x 1-1/2 inch Black Iron Bushing is a reducing fitting used to join threaded pipe systems of differing nominal sizes. Designed for compatibility with malleable iron pipe components, this bushing provides a mechanically sound, pressure-rated connection where a 3 inch female NPT fitting must be reduced to a 1-1/2 inch male NPT thread.
Key Product Features
- ✅Malleable Iron Construction– Manufactured from black malleable iron for mechanical strength and dimensional stability in pressurized gas and fluid systems.
- ✅Corrosion-Resistant Surface– Black finish helps resist scale and oxidation in dry-pipe and low-moisture environments.
- ✅Threaded Connections– Female NPT threads on the exterior and male NPT threads on the interior allow for direct installation between properly sized iron fittings or steel pipe.
- ✅Compact Reducing Profile– Designed to minimize the length of fittings in tight system layouts or when reducing pipe diameter without the use of multiple adapters.
Technical Specifications
- MaterialASTM A197 black malleable iron
- Nominal Size3 inch (female) x 1-1/2 inch (male)
- Connection TypeThreaded NPT (per ANSI B1.20.1)
- Standard ComplianceASME B16.3 / B16.14
- Maximum Pressure Rating150 PSI (non-shock, for steam and liquid systems)
Typical Use Cases
This reducing bushing is suited for installation in
- Natural gas and propane piping systems
- Low- and medium-pressure steam or hot water heating lines
- Hydronic heating loops and equipment branch lines
- Compressed air systems
Installation Guidelines
Threaded connections should be assembled using appropriate sealing materials such as PTFE tape or pipe joint compound. Over-torquing should be avoided to maintain thread integrity and prevent stress failure. Use of compatible pipe wrenches is recommended for proper seating.
The 3 inch x 1-1/2 inch Black Iron Bushing is engineered for use in piping applications where pressure integrity and dimensional accuracy are required. It supports professional-grade mechanical assemblies with reliable performance in high-demand environments.




