Details
Model2SVEPWCF0301.5
ManufacturerZ-Flex (Novaflex Group)
Product NameZ-Vent Single-Wall Stainless Steel Gas Vent Pipe
Part Number186821
Size3 inch Diameter x 18 inch Length
DescriptionSingle-wall stainless steel vent pipe section featuring Double Fail Safe™ self-sealing gasket technology and integrated locking clamp for gas-tight, positive-pressure venting applications. Designed for use with Category II, III, and IV gas-fired appliances.
Product Overview
The Z-Flex 2SVEPWCF0301.5 Z-Vent 3″ x 18″ vent pipe is engineered for professional installation in high-efficiency and condensing gas appliance systems. Constructed from 430 stainless steel, this single-wall vent section provides superior corrosion resistance and structural strength. The Double Fail Safe™ self-sealing gasket located in the female end ensures a secure, leak-free joint without the need for additional sealant. Each pipe section includes an integrated stainless locking clamp to maintain mechanical integrity under positive pressure operation. Z-Vent venting components are factory-tested and UL/ULC certified for use with Category II, III, and IV gas-fired equipment requiring stainless venting systems.
Technical Specifications
- Manufacturer Part Number2SVEPWCF0301.5
- Alternate Part Number186821
- Product TypeSingle-Wall Gas Vent Pipe
- SeriesZ-Vent
- Pipe Diameter3 inches (76 mm)
- Pipe Length18 inches (457 mm)
- Material430 Stainless Steel
- Wall TypeSingle-wall
- End ConnectionMale/Female slip-fit with Double Fail Safe™ self-sealing gasket
- Joint RetentionIntegrated stainless steel locking clamp
- Temperature RatingUp to 550°F (288°C)
- Pressure RatingPositive pressure rated up to 15 in. w.c.
- Appliance CategoryCategory II, III, and IV gas-fired appliances
- Corrosion ResistanceResistant to condensate and acidic flue gases
- Available Diameters3 to 24 inches
- Available LengthsStandard lengths up to 10 ft (3″ and 4″ diameters only)
- Cutting CapabilityField-trimmable; ensure edges are deburred before installation
- Sealing MethodFactory-installed silicone gasket (Double Fail Safe™ design)
- Mounting OrientationVertical or horizontal installation
- ComplianceUL 1738 (U.S.) and ULC S636 (Canada) listed for gas vent systems
- Surface FinishMill finish stainless steel
- Country of ManufactureUSA
Installation Notes
- Inspect vent components prior to installation for shipping damage and gasket displacement.
- Verify the integrity and position of the silicone gasket before assembly.
- Insert male end fully into the female end until seated, then tighten the integrated locking clamp.
- Do not use additional sealants or lubricants unless specified by Z-Flex documentation.
- When field-cutting, use approved metal-cutting tools and deburr ends to maintain sealing performance.
- Install venting per Z-Flex installation manual, appliance manufacturer specifications, and applicable codes.
- Maintain required clearances to combustibles for single-wall venting per code requirements.
Summary
The Z-Flex 2SVEPWCF0301.5 Z-Vent 3″ x 18″ Single-Wall Stainless Steel Gas Vent Pipe provides a professional-grade, corrosion-resistant venting solution for Category II, III, and IV gas appliances. Featuring 430 stainless steel construction, a Double Fail Safe™ self-sealing gasket, and an integrated locking clamp, it delivers secure, high-performance venting suitable for positive-pressure applications requiring UL 1738 and ULC S636 compliance.




