Details
Model2SVEPWCF0303
ManufacturerZ-Flex (Novaflex Group)
Product NameZ-Vent Single-Wall Gas Vent Pipe with Locking Clamp
Part Number23380
Size3 inch Diameter x 36 inch Length
DescriptionSingle-wall stainless steel vent pipe with integrated locking clamp, designed for gas-fired appliances. Features Double Fail Safe™ self-sealing gasketed connections for secure, code-compliant venting performance.
Product Overview
The Z-Flex 2SVEPWCF0303 Z-Vent is a professional-grade single-wall venting component used for Category II, III, and IV gas-fired appliances requiring corrosion-resistant stainless steel venting systems. Constructed from high-grade 430 stainless steel, this vent section features precision-formed ends with a Double Fail Safe™ self-sealing gasket system that ensures tight, gas-proof joints during installation. The 36-inch vent length includes an integrated locking clamp for mechanical joint security. All Z-Vent components are factory-fitted and pressure-tested for system integrity, supporting installations for condensing boilers, water heaters, and furnaces where stainless venting is specified by code.
Technical Specifications
- Manufacturer Part Number2SVEPWCF0303
- Alternate Part Number23380
- Product TypeSingle-Wall Gas Vent Pipe
- SeriesZ-Vent
- Pipe Diameter3 inches (76 mm)
- Pipe Length36 inches (914 mm)
- Material430 Stainless Steel (single-wall construction)
- Wall TypeSingle-wall
- End ConnectionMale/Female slip-fit with Double Fail Safe™ self-sealing gasket
- Joint SecurityIntegrated Locking Clamp
- Temperature RatingUp to 550°F (288°C)
- Pressure RatingPositive pressure rated (tested to 15 in. w.c.)
- Application TypeVenting for Category II, III, and IV gas-fired appliances
- Corrosion ResistanceSuitable for condensing flue gases; resists acidic condensate attack
- Available Diameters3 to 24 inches
- Available LengthsStandard up to 10 feet (3″ and 4″ diameters only)
- Cutting CapabilityField-trimmable to required length using standard sheet metal tools
- Sealing MethodFactory-installed silicone gasket (Double Fail Safe™ design)
- Mounting OrientationVertical or horizontal vent configurations per installation manual
- ComplianceUL 1738 and ULC S636 listed for gas vent systems
- Surface FinishMill finish stainless steel
- Country of ManufactureUSA
Installation Notes
- Inspect all vent components prior to installation to confirm gasket integrity and absence of deformation.
- Ensure gaskets are seated properly in female ends before assembly to prevent exhaust gas leakage.
- Assemble joints per manufacturer’s instructions using the integrated locking clamp to secure connections.
- Cut pipe lengths cleanly; deburr edges and verify full gasket engagement after trimming.
- Install vent system in accordance with Z-Flex installation manual and all applicable local and national codes.
- Maintain proper clearances to combustibles as specified for single-wall venting systems.
- Verify appliance compatibility and venting category prior to installation.
Summary
The Z-Flex 2SVEPWCF0303 Z-Vent 3″ x 36″ Single-Wall Stainless Steel Gas Vent Pipe is engineered for professional gas vent installations requiring high durability and secure, gasketed joint integrity. Featuring Double Fail Safe™ sealing technology and an integral locking clamp, this vent component ensures reliable performance in condensing and positive pressure applications meeting UL 1738 and ULC S636 compliance standards.




