Details
Model2SVEPWCF0305
ManufacturerZ-Flex (Novaflex Group)
Product NameZ-Vent Single-Wall Stainless Steel Gas Vent Pipe with Locking Clamp
Part Number23381
Size3 inch Diameter x 60 inch (5 ft) Length
DescriptionSingle-wall stainless steel vent pipe section with integrated locking clamp and Double Fail Safe™ self-sealing gasket system. Designed for venting Category II, III, and IV gas-fired appliances in accordance with UL 1738 and ULC S636 standards.
Product Overview
The Z-Flex 2SVEPWCF0305 Z-Vent vent pipe is a precision-fabricated, single-wall stainless steel component engineered for use with condensing and non-condensing gas appliances that require corrosion-resistant venting. Constructed from 430 stainless steel, this 60-inch pipe section provides durability and thermal stability for both residential and commercial mechanical systems. The female end features the Z-Flex Double Fail Safe™ self-sealing gasket, ensuring a secure, gas-tight connection without the need for sealant. Each section includes an integrated locking clamp to maintain joint integrity under positive pressure operation. The Z-Vent system is factory-tested and listed to UL 1738 and ULC S636 for venting of Category II, III, and IV gas appliances.
Technical Specifications
- Manufacturer Part Number2SVEPWCF0305
- Alternate Part Number23381
- Product TypeSingle-Wall Gas Vent Pipe
- SeriesZ-Vent
- Pipe Diameter3 inches (76 mm)
- Pipe Length60 inches (1524 mm)
- Material430 Stainless Steel
- Wall TypeSingle-wall construction
- End ConnectionMale/Female slip-fit with Double Fail Safe™ self-sealing gasket
- Joint RetentionIntegrated stainless steel locking clamp
- Temperature RatingUp to 550°F (288°C)
- Pressure RatingPositive pressure rated to 15 in. w.c.
- Vent Category CompatibilityCategory II, III, and IV gas appliances
- Corrosion ResistanceResistant to acidic condensate and high-temperature flue gases
- Available Diameters3 to 24 inches
- Available LengthsStandard lengths up to 10 feet (3″ and 4″ diameters only)
- Cutting CapabilityField-trimmable to required length with standard metal-cutting tools
- Sealing MethodFactory-installed silicone gasket, Double Fail Safe™ configuration
- Mounting OrientationSuitable for vertical or horizontal vent runs
- ComplianceUL 1738 (U.S.) and ULC S636 (Canada) certified for Category II, III, and IV appliances
- Surface FinishMill finish stainless steel
- Country of ManufactureUSA
Installation Notes
- Inspect all components prior to installation to confirm gasket integrity and fit.
- Ensure that gaskets are properly seated in the female end before assembly.
- Engage joints fully, then tighten the integrated locking clamp to secure the connection.
- Do not use additional sealants or adhesives unless specified by the manufacturer.
- Cutting of pipe should be performed with a fine-tooth saw or shear to prevent distortion of ends.
- Install venting in accordance with Z-Flex installation manual, appliance manufacturer instructions, and local mechanical code.
- Maintain all clearance requirements to combustible materials as specified for single-wall systems.
Summary
The Z-Flex 2SVEPWCF0305 Z-Vent 3″ x 60″ Single-Wall Stainless Steel Gas Vent Pipe is a durable, positive-pressure-rated venting component designed for Category II, III, and IV gas appliances. Fabricated from 430 stainless steel and featuring Double Fail Safe™ self-sealing gaskets with locking clamp retention, it ensures reliable, code-compliant performance in high-efficiency boiler, furnace, and water heater venting applications.




