Rheem SP8346 Temperature & Pressure Relief Valve – Code-Compliant Protection for Tank-Type Water Heaters
TheRheem SP8346T&P valve is an essential safety component for residential and light commercial water heaters. Designed to automatically relieve excessive temperature and pressure inside the tank, this valve protects against over-pressurization and helps maintain system integrity in compliance with plumbing and mechanical codes.
This model features a 3/4″ NPT male inlet and 3/4″ NPT female outlet, with a temperature relief setting of 210°F and a factory pressure setting of 150 psi. The included test lever allows for manual operation and inspection as part of routine system maintenance.
Key Features
- Automatic Relief– Opens when tank temperature exceeds 210°F or pressure reaches the rated threshold, preventing potential tank rupture
- Brass Body Construction– Corrosion-resistant, durable design suitable for potable water systems
- Thermo-Bonded Coating– Enhances external corrosion resistance for long-term field reliability
- Manual Test Lever– Enables field verification of operation and drainage pathways
- Universal Compatibility– Standard connections and dimensions allow use with most tank-type water heaters
Specifications
- Inlet3/4″ MNPT
- Outlet3/4″ FNPT
- Temperature Setting210°F (99°C)
- Pressure Relief Setting150 psi (10.3 bar)
- ApplicationTank-type water heaters (gas or electric)
- ComplianceASME rated and CSA listed
Installation and Maintenance
Install vertically on the top or side tapping of the water heater, depending on tank design. Discharge piping must be installed per code and routed to a safe drain point. Annual inspection and manual testing are recommended. Valve should be replaced if there are signs of corrosion, leakage, or if testing indicates failure to open or reseat properly.
Intended Use
- OEM replacement for Rheem water heaters
- Approved T&P solution for pressure-rated storage tanks
- Field-installed safety upgrade or replacement as required by inspection
Specifications
Buying Information
Confirm the SP8346 and the listed application before ordering.




