Skip to content
Need help identifying a part? Contact parts support
SKU: 7779Brand: Non-Specified Brand
,

4 inch Black Iron 90 Degree Elbow Female x Female

$16.81

4 inch Black Malleable Iron 90° Elbow – Threaded Fitting for Gas and Mechanical Systems The 4 inch Black Malleable Iron 90-Degree Elbow is a Class 150 threaded pipe fitting used to change the direction of flow in gas, steam, oil, or air piping systems.

Quantity
SKU: 7779 Categories: ,

4 inch Black Malleable Iron 90° Elbow – Threaded Fitting for Gas and Mechanical Systems

The4 inch Black Malleable Iron 90-Degree Elbowis a Class 150 threaded pipe fitting used to change the direction of flow in gas, steam, oil, or air piping systems. Manufactured to meet ASTM A197 and ANSI/ASME B16.3 standards, this elbow features two female National Pipe Taper (NPT) threads designed for tight, leak-resistant joints in non-potable systems.

This fitting is cast from black malleable iron and subjected to an annealing process for added ductility. The black finish provides moderate corrosion resistance in low-moisture environments. It is suitable for both residential and commercial mechanical applications, including gas distribution, HVAC infrastructure, and fire protection loops (non-potable).

Technical Specifications

  • ✅MaterialBlack malleable iron (ASTM A197)
  • ✅Nominal Size4 inches
  • ✅Connection TypeFemale NPT x Female NPT
  • ✅ConformanceANSI/ASME B16.3 (fittings), ANSI B1.20.1 (threads)
  • ✅Pressure Rating150 PSI maximum for steam or air; 300 PSI maximum for oil or water (non-shock)
  • ✅Bend Angle90 degrees

Installation Guidance

Install using pipe wrenches and an approved thread sealant such as PTFE tape or pipe dope rated for the service medium. Ensure proper thread engagement to avoid galling or over-torquing. Threads must be clean and free of debris prior to assembly. Fitting is not intended for welding or use in pressurized potable water systems unless otherwise approved.

Approved Uses

This elbow fitting is designed for directional changes in low- to medium-pressure systems including

  • ✅ Natural gas and propane supply lines
  • ✅ Oil burner systems and return loops
  • ✅ HVAC piping networks
  • ✅ Compressed air piping
  • ✅ Industrial steam (non-shock)

Design Considerations

  • ✅Cast Iron StrengthMalleable construction offers resistance to mechanical stress and vibration
  • ✅Standardized Thread DimensionsThread form and taper align with ANSI B1.20.1 for universal compatibility
  • ✅High Temperature ToleranceSuitable for use in high-heat environments, such as gas appliance branches or boiler systems
  • ✅Compact RadiusUseful for installations with limited space or clearance restrictions

Regulatory and Code Notes

Meets applicable mechanical code requirements for gas and non-potable fluid conveyance. Always verify installation practices and material suitability per local code enforcement and authority having jurisdiction (AHJ).

The4 inch Black Malleable Iron 90° Elbowdelivers a reliable solution for directional changes in threaded mechanical systems. Its code-compliant construction and resistance to pressure and temperature fluctuations make it a dependable component in commercial, industrial, and utility-grade installations.

Specifications

Specifications Weight 8.210000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Length (inches) 6 Width (inches) 6 Height (inches) 6 End Style Female x Female Side A 4″ Side B 4″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN 520-011 Material Black Iron Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

520-011

0
Scroll to Top