Skip to content
Need help identifying a part? Contact parts support
SKU: 1984026Brand: Cherne
,

4 inch Mechanical Gripper Plug

$3.95

4-Inch Mechanical Gripper Plug – Heavy-Duty Temporary Sealing Solution The 4-inch Mechanical Gripper Plug is a precision-engineered tool designed to provide a temporary yet secure seal in DWV (Drain, Waste, and Vent) and other non-pressurized piping systems.

Quantity
SKU: 1984026 Categories: ,

4-Inch Mechanical Gripper Plug – Heavy-Duty Temporary Sealing Solution

The 4-inch Mechanical Gripper Plug is a precision-engineered tool designed to provide a temporary yet secure seal in DWV (Drain, Waste, and Vent) and other non-pressurized piping systems. Constructed for use in testing, repair, and temporary sealing applications, this mechanical plug is an essential solution for professionals working with cast iron, PVC, or steel piping.

Performance Features

  • Mechanical Expansion DesignFeatures a rubber sealing element compressed by tightening the stainless steel wing nut, expanding against the pipe wall to form a tight seal without adhesive or solvents.
  • Reinforced MaterialsBody constructed of high-impact ABS or polypropylene for chemical resistance and structural integrity.
  • Non-Slip GripIncludes a plated steel mechanism with high-traction hardware to ensure reliable retention in pipe under test conditions.
  • Reusable ConstructionDesigned for repeated use in both field service and controlled testing environments.

Technical Specifications

  • Nominal Size4 inches
  • Usage RangeCompatible with standard 4-inch pipe I.D. (varies slightly by material: PVC, cast iron, ABS)
  • Seal TypeMechanical expansion with natural rubber gasket
  • Maximum Back PressureRated up to 17 PSI or 40 feet of head
  • HardwareZinc-plated or stainless steel components (depending on model variant)

Installation and Use

This plug is installed by inserting into the pipe and manually tightening the wing nut to expand the rubber gasket against the pipe interior. No special tools or bonding agents are required. For pressure testing, ensure plug is seated squarely and nut is fully torqued. It is not intended for permanent installations or pressurized supply lines.

Common Applications

Ideal for use in drain, waste, and vent systems during hydrostatic or air testing procedures. Also used to seal open pipe ends during construction, maintenance, or remodeling to prevent debris intrusion or water flow.

Code and Compliance Notes

Always refer to local plumbing codes regarding temporary plugging of systems under test. Proper safety protocols must be followed when pressure testing with compressed air or water to prevent ejection or injury.

The 4-inch Mechanical Gripper Plug offers a dependable and field-proven solution for pipe sealing in utility, commercial, and residential job sites. Its rugged design and ease of use make it a staple tool for contractors performing testing or isolation procedures.

Specifications

Specifications Weight 0.540000 Length (inches) 4.4 Width (inches) 4.85 Height (inches) 3.2 Item Type Plugs Brand Cherne Manufacturer Cherne Industries MPN 270245 Material Plastic Item Returns This item can be returned
Brand

Cherne

MPN

270245

0
Scroll to Top