Skip to content
Need help identifying a part? Contact parts support
SKU: 24369Brand: Non-Specified Brand
,

4 inch PVC DWV 22-1/2 Degree Street Elbow Fitting x Plastic

$3.40

4 Inch PVC DWV 22-1/2 Degree Street Elbow – Hub x Spigot The 4 inch PVC DWV 22-1/2 Degree Street Elbow is engineered to provide directional adjustment in drain, waste, and vent piping systems while maintaining continuous flow.

Quantity
SKU: 24369 Categories: ,

4 Inch PVC DWV 22-1/2 Degree Street Elbow – Hub x Spigot

The 4 inch PVC DWV 22-1/2 Degree Street Elbow is engineered to provide directional adjustment in drain, waste, and vent piping systems while maintaining continuous flow. The street design features one hub and one spigot end, allowing it to connect directly into another hub fitting without the need for a short length of pipe.

Product Applications

This fitting is commonly installed in horizontal DWV piping to adjust pipe angles slightly off centerline—ideal for navigating obstructions or gradual redirection. It is suitable for both residential and commercial non-pressurized sanitary drainage systems.

Product Features

  • ✅Angle22-1/2 degrees for smooth directional transitions
  • ✅Connection TypeSpigot x Hub (Street Elbow)
  • ✅MaterialSchedule 40 PVC – corrosion-resistant and non-toxic
  • ✅ColorWhite, industry standard for DWV systems
  • ✅InstallationSolvent weld for permanent, watertight seal

Standards and Compliance

  • MeetsASTM D2665 for DWV pipe and fittings
  • Fitting StandardsComplies with ANSI/NSF Standard 14 for plastic piping system components
  • Temperature Rating140°F (60°C) max operating temperature in DWV use
  • Pressure RatingNon-pressure applications only

Installation Notes

Use primer and solvent cement approved for PVC applications. Clean and dry surfaces thoroughly before bonding. Ensure proper alignment before solvent weld sets. Allow appropriate curing time before testing or backfilling. Not for use in pressurized systems.

Common Installation Locations

  • ????️ Horizontal waste line directional shifts
  • ????️ Access-restricted areas requiring gradual redirection
  • ????️ Retrofit installations where full 45-degree fittings are not appropriate

Additional Notes

This street elbow helps reduce overall fitting count and space requirements by eliminating the need for an additional coupling. When used properly, it provides a compact, efficient solution for alignment correction in DWV networks.

The 4 Inch PVC DWV 22-1/2 Degree Street Elbow is a reliable choice for plumbing professionals seeking precision, compliance, and durability in waste system design.

Specifications

Specifications Weight 1.030000 Brand Non-Specified Brand ADA Compliance No Angle 22-1/2 Deg Color White Length (inches) 4.25 Width (inches) 5 Height (inches) 6.38 End Style Fitting x Plastic Side A 4″ Side B 4″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN 5987 Material PVC DWV Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

5987

0
Scroll to Top