Skip to content
Need help identifying a part? Contact parts support
SKU: 7030Brand: Non-Specified Brand
,

4 inch PVC Sewer and Drain Wye Hub x Hub x Hub

$3.97

4 Inch PVC Sewer and Drain Wye – Hub x Hub x Hub Configuration This 4 inch PVC Wye fitting is designed to connect three branch lines in a 45-degree configuration, commonly used in gravity-flow sewer and stormwater drainage systems.

Quantity
SKU: 7030 Categories: ,

4 Inch PVC Sewer and Drain Wye – Hub x Hub x Hub Configuration

This 4 inch PVC Wye fitting is designed to connect three branch lines in a 45-degree configuration, commonly used in gravity-flow sewer and stormwater drainage systems. With a Hub x Hub x Hub design, it allows for solvent-welded connections to standard 4 inch PVC piping for efficient line redirection and integration into sanitary and non-pressure drainage applications.

Key Attributes and Performance

  • ✅Material Composition– Manufactured from rigid polyvinyl chloride (PVC) conforming to ASTM D2729 for non-pressure drain, waste, and vent (DWV) applications.
  • ✅Hub Ends– Accepts 4 inch nominal PVC pipe for solvent-weld installation using approved primer and cement.
  • ✅Corrosion and Chemical Resistance– Resistant to a wide range of acids, alkalis, and other corrosive materials commonly found in wastewater systems.
  • ✅Lightweight and Durable– Easier handling on site with sufficient wall thickness to withstand underground installation and burial loads.
  • ✅Non-Pressure System Compatibility– Intended for use in gravity-fed systems only; not rated for pressurized service.

Installation Guidelines

This fitting is installed using solvent cementing methods. Surfaces should be cleaned and primed prior to applying solvent cement. Allow sufficient cure time before testing or backfilling. Ensure alignment of the wye branches during installation to maintain proper flow direction and code-compliant slopes.

Fitting should be inspected for defects prior to installation and installed per applicable local and national plumbing codes. Not suitable for pressurized potable water systems or gas applications.

Typical Applications

  • Branch line connections in horizontal drainage systems
  • Sanitary sewer laterals and vent piping networks
  • Stormwater diversion and non-potable drain lines

Standards and Compatibility

Compatible with SDR 35 and ASTM D2729 systems where 4 inch nominal PVC pipe is specified. Fitting dimensions and tolerances adhere to industry norms for DWV components, facilitating smooth integration into existing installations.

Technical Specifications

  • MaterialPVC (ASTM D2729 compliant)
  • Size4 inch nominal
  • ConfigurationWye (45°) – Hub x Hub x Hub
  • ApplicationSewer, drain, and non-pressure DWV systems

Specifications

Specifications Weight 1.120000 Brand Non-Specified Brand ADA Compliance No Length (inches) 8.75 Width (inches) 4.63 Height (inches) 9.75 End Style Hub x Hub x Hub Side A 4″ Side B 4″ Side C 4″ Fitting Type Wye Item Type Fittings Manufacturer Non Specified Manufacturer MPN P304 Material PVC S&D Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed Non-Specified Brand P304 model and configuration before ordering.

Brand

Non-Specified Brand

MPN

P304

0
Scroll to Top