Skip to content
Need help identifying a part? Contact parts support
SKU: 2010913Brand: Lukjan
,

4″ Smoke Chimney Cap

$3.34

Lukjan Non-Adjustable Rain Cap — Series 47, 4″ Ø, 6-1/2″ Length × 7-1/2″ Width Fixed (non-adjustable) rain hood / vent cap designed for mounting on 4-inch round duct or flue terminations. Series 47 is a Lukjan line of rain / vent caps that provide weather protection while allowing…

Quantity
SKU: 2010913 Categories: ,

Lukjan Non-Adjustable Rain Cap — Series 47, 4″ Ø, 6-1/2″ Length × 7-1/2″ Width

Fixed (non-adjustable) rain hood / vent cap designed for mounting on 4-inch round duct or flue terminations. Series 47 is a Lukjan line of rain / vent caps that provide weather protection while allowing airflow. The cap’s dimensional footprint (6½″ depth and 7½″ width) ensures adequate overhang and protection from precipitation.

  • Series / modelSeries 47non-adjustable rain cap (Lukjan)
  • Nominal duct connection4 inch diameter (round duct)
  • Overall length (depth / projection)6-1/2 inches (6.5″)
  • Overall width (across hood brim)7-1/2 inches (7.5″)
  • Material: Galvanized steel (standard sheet metal construction for rain caps)
  • Finish: Galvanized coating (corrosion protection) or optionally painted / coated per installer preference
  • Gauge (thickness): Likely 28 or 29 gauge (common for ventilation rain caps; subject to confirmation)
  • Weight (approx): ~0.25 lb (estimated for small rain cap) — actual depends on gauge
  • Mounting / connection
    • Slip or drive-in fit over 4″ round duct end; edges may be crimped or flanged for screw fastening into duct or flashing
    • Use sheet-metal screws (e.g. #8 or #10) spaced at flanges or lugs at the cap’s base
    • Seal joints with high quality exterior sealant or flashing as needed to prevent water ingress
  • Function / purpose
    • Provides overhead protection (hood) to prevent rain, snow, and debris ingress into vent duct while allowing exhaust / intake airflow.
    • Non-adjustable design means no movable parts — simpler, more durable in many installations.
    • Overhang and brim width ensure coverage even under wind-driven rain conditions.
  • Design & performance considerations
    • Brim width (7.5″) provides sufficient radial overhang relative to the 4″ duct to limit splashback and water entry.
    • Projection (6.5″) allows vertical clearance and helps shield the duct opening in heavy rain.
    • Interior clearance: ensure the internal hood clearance does not obstruct airflow or gather debris.
    • Wind loading: cap should resist uplift or deformation due to wind, so gauge and fastening must be adequate.
  • Compatibility & application notes
    • Intended for use on vents, flues, or duct terminations where a 4″ round opening requires weather protection.
    • Not suitable for adjustable up/down dampers, as it is nonadjustable (fixed hood height).
    • Ideal for roof or sidewall terminations; may require flashing, counter-flashing, or enclosure support per local codes.
    • In corrosive or coastal environments, optional upgrades to stainless steel or painted finish may be recommended.
  • Installation recommendations
    • Ensure the duct end is cut square and free of burrs before installing the cap.
    • Use corrosion-resistant screws and sealant when fastening to avoid leaks or corrosion over time.
    • Provide accessible inspection / cleaning, as caps may collect leaves, nests, or debris at the opening.
    • Verify that the installed cap does not violate required clearances to walls, eaves, or other obstructions per building/vent code.
  • Maintenance
    • Periodically inspect for corrosion, deformation, or clogging from debris.
    • Clean inside hood if obstruction occurs (e.g. leaves, nests). Ensure fasteners remain tight.
    • Retouch finish or apply rust-inhibitive coating as needed to maintain long service life.

Specifications

Specifications Weight 0.500000 Length (inches) 7 Width (inches) 7 Height (inches) 7 Item Type HVAC Duct Brand Lukjan Gauge 26 ga Inclusions/Features Done Manufacturer Lukjan Metal Products MPN RX2804 Sub Type Rain Cap Material Steel Size 4 in Item Returns This item can be returned

Buying Information

Match RX2804 to the existing component before ordering

Brand

Lukjan

MPN

RX2804

0
Scroll to Top