Skip to content
Need help identifying a part? Contact parts support
SKU: 874338Brand: K-Flex
,

4″ X 1-1/2″ Outlet Welded Square Box

$0.86

Raco 8189 – 4″ x 1-1/2″ Welded Square Outlet Box, 21.0 cu. in. Capacity The Raco 8189 is a 4-inch square, 1-1/2 inch deep welded outlet box designed for use in branch circuit wiring and device mounting.

Quantity

Raco 8189 – 4″ x 1-1/2″ Welded Square Outlet Box, 21.0 cu. in. Capacity

TheRaco 8189is a 4-inch square, 1-1/2 inch deep welded outlet box designed for use in branch circuit wiring and device mounting. Constructed from 1/16″ (1.6 mm) pre-galvanized steel, this box is intended for use in commercial and industrial environments where surface-mounted or concealed box installations are required. Welded corners ensure structural integrity for mounting receptacles, switches, or for use as a junction box.

This box includes multiple knockouts and supports a volume capacity of 21.0 cubic inches, accommodating conductor fill requirements per NEC Article 314. The TKO (true knockouts) provide installer flexibility for either 1/2″ or 3/4″ conduit fittings without the need for additional adapters.

Key Features

  • ✅Material1/16″ Pre-Galvanized Steel – Provides corrosion resistance and mechanical strength.
  • ✅Knockout ConfigurationEight 1/2″ and four TKO knockouts on sides; three 1/2″ and two TKO knockouts on bottom for multiple conduit entries.
  • ✅Volume21.0 Cubic Inches – Allows for higher conductor count within code-compliant limits.
  • ✅UL ListedMeets requirements of UL 514-A for metallic outlet boxes.
  • ✅Welded ConstructionCorners are fully welded for added rigidity and secure device mounting.

Technical Specifications

  • ModelRaco 8189
  • Box Dimensions4″ x 4″ x 1-1/2″
  • MaterialPre-galvanized steel
  • Volume21.0 cu. in.
  • KnockoutsTotal of 17 (13 side, 4 bottom) – mix of 1/2″ and concentric TKO
  • CertificationsUL 514-A listed

Installation Notes

Raco 8189 outlet boxes are intended for use with conduit systems and are compatible with surface and concealed mounting in metal or wood framing. The raised ground screw area facilitates direct bonding and ensures clearance when mounted to surfaces. Device rings, plaster rings, and covers must be matched per application. Verify conductor fill against NEC Table 314.16(A) based on wire gauge and device configuration.

Field Applications

Common applications include wall and ceiling device mounting, splicing enclosures, or as pull boxes in conduit raceways. The box is frequently installed in commercial buildings, mechanical spaces, utility areas, and maintenance corridors. Suitable for both new construction and renovation where square boxes are required for compatibility with standard 4″ square covers and accessories.

Installation Advantages

  • ✅Flexible Entry Points– Multiple side and bottom knockouts support a range of conduit configurations.
  • ✅Surface Mount Compatible– Flat back design and ground screw offset enable clean installation against walls and framing.
  • ✅Supports Mud Rings & Raised Covers– Standard 4″ square opening accepts all Raco and compatible industry device rings.

Specifications

Specifications Weight 0.010000 Length (inches) 4 Width (inches) 1.5 Height (inches) 0.0625 Item Type Outlet Boxes Brand K-Flex Knockout Size 1/2, 1/2 – 3/4 in Manufacturer K-Flex International MPN 8189 Color Gray Material Steel Item Returns This item can be returned
Brand

K-Flex

MPN

8189

0
Scroll to Top