Details
Model2GACKIT0435
ManufacturerZ-Flex
SeriesZ-Flex Aluminum Gas Venting System
Part Number72977
DescriptionAluminum Chimney Liner Kit, 4 in. Diameter x 35 ft. Length, for Category I Natural Draft Gas Appliances.
Product Overview
The Z-Flex 2GACKIT0435 Aluminum Gas Liner Kit is a UL-listed venting assembly designed for Category I natural draft gas-fired heating appliances and fireplaces. This flexible aluminum liner provides a corrosion-resistant, gas-tight venting path within existing masonry chimneys. The 4-inch diameter, 35-foot liner is engineered to maintain consistent draft performance under negative pressure operation, ensuring safe evacuation of combustion gases. The system simplifies retrofit applications while maintaining compliance with NFPA 54 (National Fuel Gas Code) and ANSI Z223.1 standards for natural draft venting installations.
Technical Specifications
- Manufacturer Part Number2GACKIT0435
- Alternate Part Number72977
- System TypeFlexible Aluminum Chimney Liner Kit
- Diameter4 inches (nominal)
- Length35 feet
- MaterialCorrugated aluminum alloy
- Listing/CertificationUL Listed for Category I gas-fired appliance venting
- ApplicationNatural draft gas furnaces, boilers, water heaters, and fireplaces
- Category CompatibilityCategory I (non-condensing, negative pressure systems)
- Excluded ApplicationsNot for use with Category II, III, or IV gas appliances; not suitable for systems producing condensation or corrosive exhaust
- Operating PressureNegative draft only
- Temperature RangeRated for standard flue gas temperatures associated with atmospheric gas appliances
- Included Components35 ft aluminum liner, top termination, appliance connector, fasteners, and installation hardware
- Installation TypeFlexible liner for retrofit or new chimney venting installations
- Standards ComplianceNFPA 54 (National Fuel Gas Code) / ANSI Z223.1
- EnvironmentFor indoor chimney use; designed for natural draft operation
Installation Notes
- Use exclusively with Category I natural draft gas-fired appliances.
- Inspect chimney structure prior to liner installation and remove any obstructions.
- Maintain continuous upward slope and proper termination height per code.
- Do not install in applications with condensing or corrosive flue gas conditions.
- Secure all joints, terminations, and fittings according to Z-Flex installation instructions.
- Verify airtight fit and system draft following installation completion.
Summary
The Z-Flex 2GACKIT0435 Aluminum Gas Liner Kit provides a UL-listed, flexible 4-inch by 35-foot venting solution for Category I natural draft gas heating systems. Constructed from corrosion-resistant aluminum and designed for code-compliant performance, this liner system ensures reliable flue gas discharge and long-term integrity in both retrofit and new chimney applications for professional HVAC installations.




