Lukjan Duct Tee, 90° — Series 6, 4″, Crimped Connection, 9-1/4″ L × 4″ W
A 90-degree crimped duct tee from Lukjan’s Series 6 line, designed to branch airflow from a main 4-inch duct into a perpendicular 4-inch branch. The crimped connection facilitates easy insertion into mating ductwork.
- Series / modelSeries 6(Lukjan duct / fitting line):contentReference[oaicite:1]{index=1}
- Part / model numberRX7004(4″ × 4″ smoke pipe tee, 26 ga):contentReference[oaicite:2]{index=2}
- Configuration: 90° duct tee, branching at right angle
- Main diameter4 inch(for both run and branch):contentReference[oaicite:3]{index=3}
- Connection style: Crimped ends (for insertion into duct sockets):contentReference[oaicite:4]{index=4}
- Length (main run)9-1/4 inches (9.25″)contentReference[oaicite:5]{index=5}
- Width / branch size4 inches(same as main duct):contentReference[oaicite:6]{index=6}
- Material: Galvanized steel (standard for HVAC sheet metal fittings):contentReference[oaicite:7]{index=7}
- Finish: Galvanized coating / zinc finish for corrosion resistance (typical for Lukjan ductwork):contentReference[oaicite:8]{index=8}
- Gauge / thickness: 26 gauge (for the 4″ smoke pipe tee listing):contentReference[oaicite:9]{index=9}
- Weight: 0.70 lb (as per the product listing):contentReference[oaicite:10]{index=10}
- Mounting / installation
- Insert the crimped ends into the mating duct/tee sockets and secure with sheet-metal screws, rivets, or straps
- Seal all seams and joints with foil duct tape or mastic to prevent leakage
- Ensure proper alignment of run and branch ducts to minimize turbulence and stress on joints
- Applications
- Used in HVAC systems (particularly smoke pipe / furnace ductwork) to split airflow between two 4-inch ducts
- Typical in residential or light commercial installations where a side branch is needed off a 4″ main run
- Performance & design notes
- Because this is a sharp 90° branch, expect some pressure drop / flow loss relative to straight duct; system design should account for this
- The crimped connection allows easier field fit, but care must be taken to ensure a tight, secure joint
- Galvanized steel construction provides durability and compatibility with standard duct systems




