Skip to content
Need help identifying a part? Contact parts support
SKU: 1987832Brand: Non-Specified Brand
,

4 inch x 5-1/2 inch Black Steel Nipple

$6.60

4″ x 5-1/2″ Black Steel Nipple – Threaded Schedule 40 Connector for Gas, Water, and Air Systems The 4″ x 5-1/2″ Black Steel Nipple is a threaded pipe segment used to connect two female-threaded fittings in mechanical and plumbing systems.

Quantity
SKU: 1987832 Categories: ,

4″ x 5-1/2″ Black Steel Nipple – Threaded Schedule 40 Connector for Gas, Water, and Air Systems

The 4″ x 5-1/2″ Black Steel Nipple is a threaded pipe segment used to connect two female-threaded fittings in mechanical and plumbing systems. Fabricated from welded Schedule 40 black steel pipe, this nipple is designed for use in non-potable water, gas, oil, and air distribution systems operating under moderate pressure conditions.

Manufactured in compliance with ASTM A53 and threaded to ANSI B1.20.1 standards, this fitting offers uniform wall thickness, straightness, and thread consistency, supporting secure, leak-resistant installations in both new construction and retrofit applications.

Technical Specifications

  • MaterialCarbon Steel with black coating (ASTM A53 Type E or S, Grade A or B)
  • Size4″ nominal pipe diameter x 5-1/2″ overall length
  • Wall ThicknessSchedule 40
  • Connection TypeMale NPT threads on both ends
  • Thread StandardANSI B1.20.1 (National Pipe Taper)
  • End FinishThreaded & chamfered; plain end available upon request

Installation Guidelines

Install using appropriate pipe sealant or PTFE thread tape rated for system media. Tighten with a pipe wrench, ensuring not to overtighten and damage threads. Align the nipple properly to reduce stress at connection points. Final assembly should be pressure-tested per applicable code or project specifications.

Applications

Used in commercial, industrial, and mechanical piping systems to connect equipment or extend existing pipe runs. Commonly applied in fuel gas piping, compressed air systems, fire sprinkler mains (non-galvanized), and process lines where corrosion resistance from paint or galvanization is not required by code.

Material Characteristics

Black steel provides a clean, corrosion-resistant surface suitable for indoor or protected environments. Its strength and machinability make it a common choice in mechanical systems requiring threaded steel pipe. Not recommended for use in potable water systems unless otherwise coated or lined.

Specifications

Specifications Weight 3.930000 Brand Non-Specified Brand ADA Compliance No Length (inches) 4.45 Width (inches) 4.45 Height (inches) 5.55 Side A 4″ Side B 5-1/2″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 591-055 Material Black Steel Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

591-055

0
Scroll to Top