4″ x Close Black Steel Nipple – For Secure High-Pressure Threaded Connections
The 4″ x Close Black Steel Nipple is a precision-fabricated fitting designed for use in piping systems that require a short, direct threaded connection. Manufactured from schedule 40 black steel, this nipple features male National Pipe Thread (NPT) ends and is typically used in gas, oil, steam, and hydronic heating systems.
Its “close” length configuration—threaded nearly to the center—minimizes spacing between connected components, making it ideal for tight assemblies. The fitting is intended for applications where durability, strength, and corrosion resistance in non-potable systems are critical to long-term performance.
Technical Specifications
- MaterialWelded black steel (ASTM A53 or equivalent)
- Nominal Pipe Size4 inch
- LengthClose (approx. 1.5–2 inches end-to-end, varies by threading)
- EndsMale NPT x Male NPT
- Wall ThicknessSchedule 40
- Pressure RatingRated for up to 150 psi (steam), 300 psi (water/oil/gas)
- Temperature RangeSuitable for use in systems up to 500°F
- ComplianceMeets ANSI B1.20.1 and ASTM A733 specifications
Performance Benefits
- Compact ProfileClose nipple configuration minimizes piping footprint in tight installations
- High-Strength FabricationIdeal for heavy-duty systems requiring robust fittings
- Thread PrecisionTapered NPT threads allow for tight, leak-resistant seals when installed with appropriate thread sealant
- Surface ProtectionBlack oxide finish provides basic corrosion resistance during storage and installation
Common Applications
- Fuel oil distribution lines
- Low-pressure steam systems
- Natural gas and propane piping networks
- Commercial boiler systems
Installation Notes
Ensure proper alignment during installation to prevent cross-threading. Use Teflon tape or pipe joint compound rated for the service type. Avoid overtightening to prevent damage to threads or mating components. Installation should conform to applicable local and national codes.





