Harris 5620F1 Stay-Silv® 5 Brazing Alloy – 1/8″ x 20″ Rods, 5% Silver Phos-Copper
The Harris 5620F1 Stay-Silv® 5 brazing alloy is a phos-copper filler metal containing 5% silver, formulated for copper-to-copper and copper-to-low-zinc brass brazing. It offers moderate ductility and improved flow characteristics, making it suitable for HVAC, plumbing, and refrigeration system installations.
This alloy provides effective capillary action and is self-fluxing on copper joints. It is typically used where joint fit-up may vary and where cost efficiency is important compared to higher silver alloys.
Product Features
- Alloy TypeBCuP-3 with 5% silver content
- Use CaseSuitable for copper-to-copper and copper-to-brass joints (flux required for brass)
- Phosphorus ContentActs as a fluxing agent on copper
- Melting RangeSolidus 1190°F (643°C), Liquidus 1495°F (813°C)
- Working RangeRecommended brazing between 1325°F–1500°F (720°C–815°C)
- Rod Dimensions1/8 inch diameter, 20 inches long
- ComplianceMeets EU REACH and RoHS directives
Application Notes
Apply directly to properly cleaned copper or low-zinc brass surfaces. No external flux is required for copper-to-copper brazing. Use a compatible flux when brazing brass or other non-copper alloys. Maintain correct joint clearance to ensure proper flow and strength. Avoid use on ferrous or nickel-bearing metals.
Installation Guidelines
Stay-Silv® 5 should be applied by trained professionals using appropriate torch equipment. Uniform heating and proper joint preparation are required for optimal results. Recommended for use in pressurized HVACR systems and plumbing applications where consistent mechanical strength and leak prevention are essential.
Specifications
Buying Information
Confirm the listed Harris Product Group 5620F1 identifier and configuration match your application before ordering.




