Skip to content
Need help identifying a part? Contact parts support
SKU: 1842049Brand: Metal-Fab
,

5″ x 60″ Round Pipe, Type B Gas Vent

$14.43

Details Model: 5M5 Manufacturer: Metal-Fab, Inc. Product Name: Type B Gas Vent Pipe – Series M Part Number: 1842049 Description: Double-wall Type B vent pipe, 5-inch diameter, 5-foot length, aluminum inner liner, galvanized steel outer wall, UL-listed for Category I gas ap…

Quantity
SKU: 1842049 Categories: ,

Details

Model5M5
ManufacturerMetal-Fab, Inc.
Product NameType B Gas Vent Pipe – Series M
Part Number1842049
DescriptionDouble-wall Type B vent pipe, 5-inch diameter, 5-foot length, aluminum inner liner, galvanized steel outer wall, UL-listed for Category I gas appliances.

Product Overview

The Metal-Fab 5M5 Type B Gas Vent Pipe is a UL-listed, double-wall venting component designed for use with Category I natural draft gas-fired appliances, including furnaces, boilers, and water heaters. The vent features an aluminum inner flue and a galvanized steel outer casing, providing corrosion resistance and thermal performance while maintaining reduced clearance to combustible materials. The 5-inch diameter, 5-foot section is part of Metal-Fab’s M-Series system, engineered for secure joint locking and simplified alignment in residential, light commercial, and multifamily venting applications. The precision-rolled end design allows for fast, safe installation without field fabrication.

Technical Specifications

  • Manufacturer Part Number5M5
  • Alternate Part Number1842049
  • SeriesM-Series Type B Gas Vent
  • Vent TypeType B Double-Wall Gas Vent
  • Inner MaterialAluminum alloy (corrosion-resistant)
  • Outer MaterialGalvanized steel
  • Nominal Diameter5 inches (127 mm)
  • Length60 inches (5 feet / 1.52 meters)
  • Wall ConstructionDouble-wall, air-insulated design
  • Wall Thickness1/4 inch nominal
  • Connection TypeTwist-lock joint with positive stop
  • Clearance to Combustibles1 inch (per UL 441 listing)
  • Maximum Operating Temperature480°F (249°C)
  • Appliance CategoryCategory I (natural draft, non-positive pressure)
  • ApplicationGas-fired furnaces, boilers, unit heaters, and water heaters
  • Installation OrientationVertical or offset as permitted by code
  • ComplianceUL 441, NFPA 54 (National Fuel Gas Code), ICC Standard Fuel Gas Code
  • FinishMill aluminum (inner), galvanized steel (outer)
  • WeightApprox. 2.8 lb per linear foot (varies by diameter)
  • Use EnvironmentIndoor venting applications where combustion gas temperatures remain below condensation threshold

Installation Notes

  • Verify appliance category and vent sizing per NFPA 54 and manufacturer’s tables before installation.
  • Align and engage the twist-lock connections fully to ensure positive mechanical locking between sections.
  • Maintain minimum 1-inch clearance from combustibles along the entire vent run.
  • Support vertical runs at intervals per code using approved wall straps or joist hangers.
  • Terminate with a UL-listed Type B vent cap; ensure proper draft hood connection at appliance outlet.
  • Do not mix venting components from different manufacturers within a single system.

Summary

The Metal-Fab 5M5 Type B Gas Vent Pipe is a 5-inch diameter, 5-foot-long double-wall vent section designed for Category I gas appliance venting. Featuring aluminum inner and galvanized steel outer construction, it provides reduced clearance to combustibles, efficient draft performance, and quick twist-lock assembly. This component meets UL 441 and NFPA 54 standards for professional installation in residential and light commercial systems.

Specifications

Specifications Weight 6.670000 Length (inches) 5 Width (inches) 5 Height (inches) 60 Item Type HVAC Venting Brand Metal-Fab Gauge 0.012/0.018 in Manufacturer Metal-Fab MPN 5M5 Sub Type Double Wall Pipe Connection Type Twist-Lock Diameter 5 in Material Aluminum/Steel Item Returns This item can be returned
Brand

Metal-Fab

MPN

5M5

0
Scroll to Top