Mueller 61220250C Copper Line Set – 3/8″ x 3/4″ x 1/2″ x 25′ DuraGuard Coated, Nitrogen-Charged
The Mueller 61220250C Copper Line Set is a refrigeration-grade, nitrogen-charged copper tubing assembly designed for HVAC and refrigeration applications requiring clean, high-pressure, and corrosion-resistant connections. Manufactured from seamless UNS C12200 copper, the tubing meets ASTM B280 standards for Air Conditioning and Refrigeration (ACR) service. The DuraGuard™ protective coating provides enhanced abrasion and environmental resistance for indoor and outdoor installations. This line set is engineered for use with high-pressure refrigerants, including R-410A and R-32, ensuring system reliability and compliance with modern refrigerant standards.
Details
- ManufacturerMueller Industries
- Model Number61220250C
- Product TypeRefrigeration-Grade Copper Line Set
- Configuration3/8″ Liquid Line x 3/4″ Suction Line x 1/2″ Insulation x 25′ Length
- MaterialSeamless Copper – UNS C12200 (Phosphorus-Deoxidized, Non-Arsenical)
- Manufacturing StandardASTM B280 – ACR Specification
- Internal TreatmentNitrogen-charged for oxidation prevention and system cleanliness
- Exterior ProtectionDuraGuard™ polymer coating for abrasion and corrosion resistance
- Outer Diameter (Suction Line)3/4 inch (19.05 mm)
- Outer Diameter (Liquid Line)3/8 inch (9.53 mm)
- Insulation Thickness1/2 inch (12.7 mm)
- Length25 feet (7.62 meters)
- Maximum Working Pressure700 psi
- Maximum Service Temperature250°F (121°C)
- Wall TypeSeamless, drawn copper tubing
- EndsCapped and sealed under nitrogen charge
- Refrigerant CompatibilityR-410A, R-32, and other high-pressure refrigerants
- Installation TypeField-brazed or flared connections
- Corrosion ResistanceHigh – interior and exterior protection from oxidation and environmental exposure
- ComplianceASTM B280, UL Recognized, RoHS Compliant
Technical Application
The Mueller 61220250C ACR copper line set is engineered for refrigerant transport in air conditioning, heat pump, and refrigeration systems. The seamless, nitrogen-purged copper construction eliminates internal oxidation, preserving refrigerant purity and minimizing system contamination. The DuraGuard-coated exterior provides mechanical protection against environmental wear during routing and service. This product supports high-pressure refrigerants and is suited for both residential and commercial system installations. Each coil is pressure-sealed, capped, and ready for field fabrication, ensuring compliance with mechanical code requirements and manufacturer specifications.
Specifications
- Liquid Line OD3/8 inch (9.53 mm)
- Suction Line OD3/4 inch (19.05 mm)
- Insulation Thickness1/2 inch (12.7 mm)
- Length25 feet (7.62 meters)
- Material GradeUNS C12200 Copper (Phosphorus-Deoxidized)
- Manufacturing ProcessSeamless, drawn tubing – nitrogen-charged interior
- Working Pressure700 psi (maximum)
- Service TemperatureUp to 250°F (121°C)
- Exterior ProtectionDuraGuard™ polymer jacket
- Internal ConditionNitrogen-sealed, oxidation-free
- Refrigerant CompatibilityR-410A, R-32, R-22, and other approved ACR refrigerants
- ComplianceASTM B280, UL Listed, RoHS Compliant
- End SealingFactory-capped and nitrogen-charged
- Intended UseHVAC and refrigeration system refrigerant transport
Installation and Use
Installation should be performed by qualified HVAC professionals in accordance with local and national mechanical codes. Tubing must be cut square, deburred, and cleaned before brazing or flaring. Maintain sealed ends until assembly to prevent contamination. When brazing, purge with nitrogen to avoid internal oxidation. The DuraGuard coating allows for direct contact with building materials and environmental exposure without risk of surface corrosion or abrasion damage.
Summary
The Mueller 61220250C Copper Line Set (3/8″ x 3/4″ x 1/2″ x 25′) is a seamless, nitrogen-charged ACR copper assembly manufactured from C12200 copper and protected with DuraGuard coating for enhanced durability. Designed to ASTM B280 standards, it supports high-pressure refrigerants such as R-410A and R-32 and maintains system cleanliness and pressure integrity. The combination of internal nitrogen protection and exterior coating ensures long-term reliability and efficiency in HVAC and refrigeration system installations.
Specifications
Buying Information
Match 61220250C to the existing component before ordering.





