Skip to content
Need help identifying a part? Contact parts support
SKU: 1935510Brand: RectorSeal
,

Electronic Float Switch for Multi-Purpose Condensate Management System

$7.53

RectorSeal 96108 – AquaGuard AG-1250E Electronic Condensate Overflow Safety Switch The RectorSeal AquaGuard AG-1250E is an electronic condensate overflow switch designed to protect HVAC equipment by detecting water in auxiliary drain pans or other secondary containment areas.

Quantity

RectorSeal 96108 – AquaGuard AG-1250E Electronic Condensate Overflow Safety Switch

The RectorSeal AquaGuard AG-1250E is an electronic condensate overflow switch designed to protect HVAC equipment by detecting water in auxiliary drain pans or other secondary containment areas. It utilizes solid-state sensing with no moving parts, offering a dependable solution for shutting down HVAC systems in the presence of water and preventing potential property or equipment damage.

System Application

This unit is used primarily in residential and light commercial HVAC systems to monitor water accumulation due to condensate line blockages or equipment drainage failure. It is field-configurable as either normally open or normally closed, supporting integration with system controllers or external alarm devices.

Key Features

  • Electronic SensorSolid-state probe detects water at a trigger depth of 1/16 inch
  • Universal MountingCan be installed horizontally or vertically in pans, on walls, or directly to equipment
  • Low-Profile HousingCompact form factor supports tight-space installations
  • LED Status IndicatorVisual confirmation of moisture detection for service verification
  • Field-Selectable OutputSwitch can be wired for normally open or normally closed operation
  • Adjustable Mounting BracketAllows control over sensing height to accommodate varied system layouts

Technical Specifications

  • ModelAquaGuard AG-1250E
  • Voltage24 VAC
  • Max Current5 Amps
  • Control Wire Length6 feet
  • Sensing Trigger Level1/16 inch water depth
  • DimensionsApprox. 14″ L x 8.27″ W x 9.25″ H (packaged)

Installation Notes

Unit should be installed by qualified HVAC technicians in accordance with local codes. The switch can be wired directly to low-voltage safety circuits in the air handler or connected to an isolation relay. Ensure that sensor surface is clear of debris and installed level with the pan floor or designated sensing area. Confirm polarity and control circuit logic before energizing the system.

Contractor Considerations

  • Solid-state design reduces failure rates compared to float-type switches
  • Supports integration into both new installations and retrofit service upgrades
  • Compatible with overflow safety protocols required by most building codes
  • Adjustable bracket enhances versatility across coil types and configurations

Summary

The RectorSeal AG-1250E electronic condensate safety switch offers solid-state reliability and flexible installation options for condensate overflow protection. Its compact design, fast response time, and field-adjustable mounting make it a preferred solution for preventing moisture-related HVAC system shutdowns or damage. Suitable for horizontal or vertical evaporator installations where secondary drain pans are used.

Specifications

Specifications Weight 0.500000 Length (inches) 9 Width (inches) 5 Height (inches) 1.5 Item Type Sensors Brand RectorSeal Manufacturer CWS Industrials Company MPN 96108 Sub Type Solid State Sensor Amperage Rating 5:00 am Material Metal/Plastic Application Multipurpose water sensor is mounted directly in metal/plastic secondary pan, floor or wall, A high-amperage, solid state sensor with no moving parts to break down or become clogged. The low profile design makes it easy to install. Item Returns This item can be returned
Brand

RectorSeal

MPN

96108

0
Scroll to Top