Skip to content
Need help identifying a part? Contact parts support
SKU: 1937734Brand: Rheem
,

FV Sensor Kit

$10.08

Rheem SP20172 – FV Sensor Kit for Flammable Vapor Detection in Residential and Commercial Water Heaters The Rheem SP20172 is an OEM flammable vapor (FV) sensor replacement kit designed for use in Rheem, Ruud, Richmond, PerfectFit, GE, and Hotpoint FVIR-compliant water heaters.

Quantity
SKU: 1937734 Categories: ,

Rheem SP20172 – FV Sensor Kit for Flammable Vapor Detection in Residential and Commercial Water Heaters

The Rheem SP20172 is an OEM flammable vapor (FV) sensor replacement kit designed for use in Rheem, Ruud, Richmond, PerfectFit, GE, and Hotpoint FVIR-compliant water heaters. This sensor plays a critical role in safety management by detecting the presence of flammable vapors in the vicinity of the combustion chamber. Upon detection, it signals the control system to disable the gas valve and prevent burner ignition, mitigating the risk of fire or explosion.

Primary Applications

  • FVIR (Flammable Vapor Ignition Resistant) gas water heaters
  • Residential and light commercial models requiring combustion zone vapor monitoring
  • OEM replacement in systems equipped with flammable vapor detection safety logic

Included Components

  • AP13447-3FV Sensor
  • AP13450-3Cap Plug
  • AP14446Wire Tie (6″)
  • AP15048Installation Instructions

Technical Overview

  • Sensor FunctionMonitors airspace for hydrocarbon vapors; disables gas valve upon detection
  • CompatibilityRheem, Ruud, Richmond, PerfectFit, GE, Hotpoint FVIR-rated units
  • Voltage/SignalLow-voltage signal communication with controller board (part of closed safety loop)
  • Installation MethodSurface-mounted sensor with integrated plug and clip-in harness

Installation Considerations

Sensor replacement requires electrical disconnection and secure reinstallation to original harness location. Always isolate power and gas before service. Mounting location and sensor orientation must match original configuration to preserve sensor performance and flame lockout reliability. It is recommended that service be performed by qualified personnel to ensure compliance with manufacturer specifications and local code requirements.

Contractor Notes

  • Designed for field service in systems experiencing FV sensor lockout or fault codes
  • Resetting unit after installation may require control board reset or power cycling per OEM procedures
  • Sensor does not reset itself after tripping; full replacement is required

Performance and Safety

  • Ensures compliance with ANSI Z21.10.1 and FVIR water heater design standards
  • Direct replacement; maintains OEM system integrity and sensor calibration parameters
  • Critical to combustion safety system; do not bypass or substitute with non-OEM components

Specifications

Specifications Weight 0.150000 Length (inches) 6.7 Width (inches) 2.7 Height (inches) 9.4 Item Type Water Heater Parts Brand Rheem Manufacturer Rheem Manufacturing Company MPN SP20172 Sub Type FV Sensor Kit Includes AP13447-3 (1) – FV Sensor AP13450-3 (1) – Cap Plug AP14446 (1) – Wire Tie – 6 in. AP15048 (1) – FV Sensor Replacement Kit Installation Item Returns This item can be returned

Buying Information

Match SP20172 to the existing application and source specifications before ordering

Brand

Rheem

MPN

SP20172

0
Scroll to Top