Details
ModelP382LE51
ManufacturerLiberty Pumps
SeriesPro380 Simplex Sewage System
Part Number1975952
DescriptionPre-assembled simplex sewage ejector package, 1/2 HP, 115V, 1-phase, 2-inch discharge, 24″ x 24″ basin, and QuickTree® float system.
Product Overview
The Liberty Pumps P382LE51 is a factory pre-assembled simplex sewage ejector system engineered for residential and light commercial wastewater handling applications. Designed as part of the Pro380-Series, this system features a 24″ x 24″ polyethylene basin with a 41-gallon capacity, optimized for shallow installations and conditions where excavation is limited by bedrock or dense soil. The unit includes a Liberty LE51-series sewage pump rated at 1/2 HP with a 2-inch solids-handling capability, operating on 115V single-phase power. Integrated QuickTree® float technology allows for easy float service access without disconnecting plumbing or removing the pump assembly.
Technical Specifications
- Manufacturer Part NumberP382LE51
- Alternate Part Number1975952
- System TypeSimplex sewage ejector package
- SeriesPro380
- Pump ModelLE51-Series submersible sewage pump
- Horsepower1/2 HP
- Voltage115 VAC
- PhaseSingle
- Full Load Amps12 A (nominal)
- Discharge Size2-inch NPT vertical discharge
- Solids Handling Capacity2 inches (spherical)
- Maximum Flow Rate110 GPM at 5 feet TDH
- Maximum Head25 feet
- Switch TypePiggyback-style automatic float with QuickTree® system
- Basin Dimensions24 inches (diameter) x 24 inches (depth)
- Basin Capacity41 gallons
- Basin MaterialStructural-grade polyethylene
- Cover TypeGas-tight, heavy-duty cover with cord grommets and inlet hub
- Inlet Hub Size4 inches
- Vent Size2 inches
- Discharge MaterialPVC or cast iron, depending on configuration
- Check ValveField-installed (not included in all configurations)
- Operating TemperatureUp to 140°F (60°C)
- Mounting ConfigurationFloor or in-ground installation
- ComplianceUL/CSA listed pump; basin assembly meets standard plumbing codes
- ApplicationsBasement bathrooms, residential sewage lift, and low-depth sump installations
Installation Notes
- Install the Pro380 unit in accordance with local plumbing and electrical codes.
- Set basin on a stable, compacted base to prevent shifting or settling.
- Connect vent, discharge, and inlet fittings per the manufacturer’s installation guide.
- Ensure power circuits are wired on separate breakers for proper monitoring.
- Inspect and test float operation prior to system start-up.
- Periodic maintenance access is simplified via the QuickTree® system for float servicing.
Summary
The Liberty Pumps P382LE51 Pro380 Simplex Sewage Ejector Package is a pre-assembled, 1/2 HP system featuring a 24″ x 24″ basin, and QuickTree® float assembly. Engineered for high-reliability sewage handling in shallow or confined installations, it provides 2-inch solids-handling capacity, 41-gallon basin volume, and long service life suitable for professional-grade wastewater lift applications.
Specifications
Buying Information
Confirm the P382LE51 and listed product application before ordering.




