Skip to content
Need help identifying a part? Contact parts support
SKU: 1874229Brand: Non-Specified Brand
,

1-1/2 inch Copper 90 Degree Street Press Elbow Fitting x Copper

$12.91

1-1/2 Inch Copper 90° Street Press Elbow – Press x Street End The 1-1/2 inch copper 90-degree street press elbow is designed to facilitate directional changes in press-connect potable water and hydronic piping systems.

Quantity
SKU: 1874229 Categories: ,

1-1/2 Inch Copper 90° Street Press Elbow – Press x Street End

The 1-1/2 inch copper 90-degree street press elbow is designed to facilitate directional changes in press-connect potable water and hydronic piping systems. With one press end and one street (spigot) end, this fitting enables close-coupling into another copper fitting without additional pipe, minimizing space requirements and reducing installation time.

Technical Construction and Compliance

This fitting is manufactured from lead-free wrought copper and meets applicable national plumbing codes. It is engineered for use in systems requiring flame-free, mechanical press connections and conforms to industry performance expectations

  • ✅MaterialLead-free copper (ASTM B75 or equivalent)
  • ✅Connection TypePress x Street (Spigot)
  • ✅Seal ElementEPDM O-ring factory-installed and rated for potable water and hydronic heating applications
  • ✅Standard ComplianceASME B16.51, NSF/ANSI 61 and 372, IAPMO/UPC listed

Installation Considerations

Press connections require a compatible press tool and jaws suited to the fitting profile. Ensure the pipe end is deburred, cleaned, and properly inserted to the insertion depth mark prior to pressing. Follow the fitting manufacturer’s guidelines for inspection and pressure testing. Do not use for steam, fuel gas, or compressed air applications unless specifically approved.

Field Applications

This elbow is commonly used in residential and commercial systems to create compact 90-degree directional changes—typically in wall cavities, mechanical rooms, or riser transitions—where space conservation and reduced fitting counts are priorities. The street end allows direct insertion into another fitting, reducing overall joint length.

Performance and System Benefits

  • ✅Reduced Installation Time– No soldering or flux required; ideal for job sites with flame restrictions or water-sensitive areas
  • ✅Consistent Joint Quality– Press technology minimizes risk of human error common to soldered joints
  • ✅Code-Compliant Lead-Free Copper– Suitable for potable water systems under all modern plumbing codes

Specification Summary

  • Nominal Size1-1/2 inch
  • Bend Angle90 degrees
  • End ConnectionsPress x Street (copper spigot)
  • Operating PressureUp to 200 psi (dependent on system rating and installation method)
  • Temperature RangeUp to 250°F (EPDM seal rating)

The 1-1/2 Inch Copper 90° Street Press Elbow provides a dependable, code-compliant solution for directional transitions in modern press-connect systems. Its compact geometry and flame-free installation make it a practical choice for efficient layout in water and heating applications.

Specifications

Specifications Weight 0.600000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Application Potable Water, Hydronic Heating (with Glycol), Chilled Water, Compressed Air (200 psi Max), Non-Medical Gases (140 psi Max), Low Pressure Steam (15 psi Max), Vacuum (24.5 in Mercury Max at 68 deg F) Length (inches) 2.7 Width (inches) 5.15 Height (inches) 2.1 End Style Fitting x Copper Side A 1-1/2″ Side B 1-1/2″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN PF 02385 Material Copper Product Family Fittings Warranty 50 Years Limited Item Returns This item can be returned

Buying Information

Confirm the listed pipe elbow configuration, connection details, and size for MPN PF 02385 before ordering.

Brand

Non-Specified Brand

MPN

PF 02385

0
Scroll to Top