Skip to content
Need help identifying a part? Contact parts support
SKU: 5357Brand: Non-Specified Brand
,

1-1/2 inch Copper Street 90 Degree Elbow Copper x Fitting

$8.16

1-1/2” Copper Street 90° Elbow – Commercial-Grade Transition Fitting The 1-1/2” Copper Street 90 Degree Elbow is a high-quality fitting designed to facilitate directional changes in copper tubing systems, typically where a close quarter bend is required.

Quantity
SKU: 5357 Categories: ,

1-1/2” Copper Street 90° Elbow – Commercial-Grade Transition Fitting

The1-1/2” Copper Street 90 Degree Elbowis a high-quality fitting designed to facilitate directional changes in copper tubing systems, typically where a close quarter bend is required. Featuring one female (cup) end and one male (street) end, this elbow allows direct insertion into another fitting without the need for an additional short piece of pipe, reducing space requirements and installation time.

Manufactured fromlead-free wrought copperthis fitting is engineered to meet ASTM B75 and B88 specifications and is suitable for use in both potable water and hydronic heating systems. Its 90-degree bend is commonly used to route Type L or M copper tubing around structural obstacles or along walls and ceilings where sharp transitions are necessary.

Key Performance Advantages

  • ✅One-Cup / One-Street DesignSimplifies changes in direction without adding unnecessary pipe length
  • ✅Lead-Free ComplianceConforms to NSF/ANSI 61 and 372 for use in potable water systems
  • ✅Formed from Wrought CopperDelivers consistent wall thickness and strength for pressurized applications
  • ✅Sweat ConnectionCompatible with standard soldering procedures for permanent, pressure-tight seals
  • ✅Code-CompliantMeets UPC and IPC standards for copper solder joint fittings

Technical Specifications

  • Size1-1/2 inch nominal
  • MaterialLead-free wrought copper (ASTM B75/B88)
  • Connection TypeStreet x C (male sweat x female sweat)
  • Angle90 degrees
  • CertificationNSF/ANSI 61 & 372 listed; Lead-Free compliant

Installation Overview

This fitting is intended for soldered copper-to-copper transitions. Use emery cloth or a fitting brush to clean both mating surfaces before applying flux. A propane torch and lead-free solder should be used to achieve a watertight joint. Always allow fittings to cool naturally and pressure-test the system in accordance with local plumbing codes.

Common Applications

The 1-1/2” copper street 90° elbow is regularly specified in residential and light commercial water distribution systems. Typical use cases include

  • Routing domestic water supply lines through joists, studs, or walls
  • Connecting water heaters, recirculation loops, and boiler supply returns
  • Facilitating tight offsets near structural or mechanical obstructions

Code Insight

All copper fittings used in potable water systems must comply with federal lead content requirements as established under the Reduction of Lead in Drinking Water Act. This fitting complies with all relevant provisions, including NSF/ANSI 61 and 372 certifications for lead-free plumbing components.

Conclusion

For professional-grade directional changes in copper plumbing systems, the1-1/2” Copper Street 90 Degree Elbowoffers a compact, reliable solution. Designed for durability, accuracy, and compliance, this fitting minimizes space constraints while maintaining the performance integrity required for long-term installations.

Specifications

Specifications Weight 0.440000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Length (inches) 3.25 Width (inches) 1.74 Height (inches) 3.12 End Style Copper x Fitting Side A 1-1/2″ Side B 1-1/2″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN W 02385 Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the 1-1/2 inch configuration, copper material, angle and copper x fitting ends before ordering.

Brand

Non-Specified Brand

MPN

W 02385

0
Scroll to Top