1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee – Wrot Copper, Sweat Ends
The 1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee is a precision-formed wrot copper fitting designed for use in soldered copper tube systems. This reducing tee allows for a direct branch line reduction from 1-1/2 inch main lines to a 1/2 inch outlet, making it suitable for hot and cold potable water, hydronic heating, and other pressurized water service applications. All outlets are designed for sweat (cup) connections.
Applications
- Potable water distribution systems
- Hydronic heating loops
- Residential and commercial building plumbing layouts
Product Features
- ✅Wrot Copper ConstructionMeets ASTM B75 and B88 specifications for strength, corrosion resistance, and workability
- ✅Lead-Free ComplianceCertified to NSF/ANSI 61 and NSF 372 for safe use in potable water systems
- ✅Accurate FormingFactory-formed to ensure consistent dimensions and reliable alignment during installation
Technical Specifications
- MaterialWrot copper (C12200)
- Nominal SizesMain line inlets/outlets – 1-1/2 inch; branch – 1/2 inch
- Connection TypeSweat (socket) x Sweat x Sweat
- StandardsASME B16.22; Lead-Free under Federal Public Law 111-380 (Reduction of Lead in Drinking Water Act)
Installation Guidance
Install using conventional soldering practices for copper tube. Clean mating surfaces with emery cloth or brush; apply approved flux; heat evenly and apply lead-free solder to achieve full capillary action around joints. Proper support and alignment are essential to maintain correct branch geometry and ensure long-term service integrity.
Best Practices
- ✅ Use Type L or Type M copper tubing as specified by code or application requirements
- ✅ Ensure all joints are cleaned and fluxed prior to heating to promote full solder penetration
- ✅ Support assemblies during soldering to prevent joint stress or misalignment
Performance Notes
This reducing tee is suitable for systems operating up to 400°F and 200 PSI, consistent with standard copper tube ratings. The use of lead-free solder and approved flux is required for code compliance in potable systems.
The 1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee offers a durable, corrosion-resistant transition fitting ideal for long-term performance in new construction or retrofit copper piping systems. Its dimensional accuracy and certified materials make it a dependable choice for commercial and residential applications requiring pressure-rated fittings.
Specifications
Buying Information
Confirm the listed configuration and specifications for MPN W 40244 before ordering.




