1-1/2 Inch x 1 Inch Galvanized Iron Reducing Coupling – Threaded FPT x FPT
The 1-1/2 inch x 1 inch Galvanized Iron Reducing Coupling provides a secure, corrosion-resistant solution for connecting two pipes of different nominal diameters. Designed for use in low- to medium-pressure systems, this fitting is suitable for distributing water, air, oil, or other non-corrosive fluids in both residential and commercial applications.
Construction and Compliance
Manufactured from cast iron and hot-dip galvanized to ASTM A153 standards, this coupling features female National Pipe Taper (NPT) threads on both ends. It allows for efficient transitions between 1-1/2 inch and 1 inch piping while maintaining system pressure and mechanical stability.
- ✅MaterialGalvanized cast iron body with corrosion-resistant zinc coating
- ✅End Connections1-1/2 inch FPT x 1 inch FPT (ANSI B1.20.1 standard)
- ✅Pressure RatingSuitable for use in systems up to 150 PSI (verify per installation conditions)
- ✅ComplianceTypically conforms to ASME B16.3 or B16.14 for cast fittings
Installation Notes
Threads should be clean and properly sealed using PTFE tape or an approved thread compound. The coupling should be hand-tightened and finished with a pipe wrench, taking care not to overtighten and damage threads. Pipe alignment and thread engagement should be verified prior to pressure testing.
- ✅Thread Sealant RequiredUse approved compounds for water or air systems
- ✅TorqueApply consistent tightening to avoid thread stripping or cracking
- ✅SupportEnsure pipe is properly anchored to avoid stress on the joint
Typical Applications
Commonly used in steel or galvanized pipe systems for water distribution, irrigation, and compressed air setups. Ideal for retrofit applications or where pipe sizing changes are required in mechanical rooms, utility lines, or branch piping systems.
Performance Advantages
- ✅Corrosion ResistanceHot-dip galvanized finish protects against moisture and oxidation
- ✅Dimensional ConsistencyTapered threads ensure mechanical engagement and sealing
- ✅Versatile UseCompatible with Schedule 40 or 80 galvanized and black steel pipe
The 1-1/2 inch x 1 inch Galvanized Iron Reducing Coupling offers a durable and code-compliant method for reducing pipe size within threaded piping systems. Its rugged construction and corrosion-resistant finish make it suitable for both indoor and outdoor installations subject to variable environmental conditions.




