Skip to content
Need help identifying a part? Contact parts support
SKU: 6385Brand: Non-Specified Brand
,

1-1/2 inch x 24 inch Galvanized Steel Nipple

$6.19

1-1/2″ x 24″ Galvanized Steel Nipple – Schedule 40, Threaded Both Ends The 1-1/2″ x 24″ galvanized steel nipple is a straight pipe section with NPT threads on both ends, designed for extending pipe runs or connecting components in threaded systems.

Quantity

1-1/2″ x 24″ Galvanized Steel Nipple – Schedule 40, Threaded Both Ends

The 1-1/2″ x 24″ galvanized steel nipple is a straight pipe section with NPT threads on both ends, designed for extending pipe runs or connecting components in threaded systems. Manufactured from Schedule 40 welded steel pipe and hot-dip galvanized per ASTM A153 standards, this fitting provides corrosion protection in both indoor and outdoor applications.

Galvanized steel nipples are suitable for mechanical, water distribution, and air systems, especially in environments where moisture or oxidation is a concern. The zinc coating serves as a sacrificial barrier, extending the service life of the underlying steel substrate.

Product Features

  • ✅Threaded ConnectionsNPT threads on both ends, machined to ANSI B1.20.1 for tight, pressure-rated joints.
  • ✅Hot-Dip GalvanizedZinc-coated exterior resists rust and complies with common code requirements for non-potable water applications.
  • ✅Schedule 40 Wall ThicknessProvides strength and pressure capacity suitable for industrial, agricultural, and commercial piping systems.
  • ✅Welded Steel Pipe BodyManufactured in accordance with ASTM A53 Type E or S for consistent structural performance.

Installation Considerations

Use thread sealant or PTFE tape on male threads prior to assembly to ensure a leak-resistant connection. Apply torque using pipe wrenches on the unthreaded portion of the nipple to avoid damaging threads. Confirm compatibility with adjoining materials and avoid contact with dissimilar metals unless isolated to prevent galvanic corrosion.

Application Scope

Commonly used in low-pressure water lines, HVAC systems, structural pipe supports, and compressed air networks. Suitable for irrigation, non-potable fluid handling, and mechanical piping installations requiring extended runs between threaded fittings.

Material Note

Galvanized steel is not recommended for use with potable water in certain jurisdictions due to the potential for zinc leaching. Always verify local code compliance and intended fluid compatibility before use.

Technical Specifications

  • Size1-1/2″ NPT x 24″ Length
  • MaterialCarbon Steel, Schedule 40
  • FinishHot-Dip Galvanized (ASTM A153 or equivalent)
  • ThreadsANSI B1.20.1 NPT – Both Ends
  • ComplianceMeets ASTM A53 and applicable ASME specifications

The 1-1/2″ x 24″ galvanized steel nipple is built for mechanical integrity and corrosion resistance in threaded steel piping systems. Its extended length and durable construction make it suitable for general-purpose and infrastructure applications requiring reliable performance under moderate operating pressures.

Specifications

Specifications Weight 5.440000 Brand Non-Specified Brand ADA Compliance No Length (inches) 24 Width (inches) 1.9 Height (inches) 1.9 Side A 1-1/2″ Side B 24″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 567-240HC Material Galvanized Steel Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and threaded connection details for MPN 567-240HC before ordering.

Brand

Non-Specified Brand

MPN

567-240HC

0
Scroll to Top